STUDIES ON THE WEAR AND FAILURE OF PLASTIC GEARS. (4TH REPORT, ON THE FATIGUE OF PLASTIC MATERIALS USED FOR GEARS).

被引：0

作者：

Shoji, Akira

机构：

来源：

Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C | 1987年 / 53卷 / 491期

关键词：

D O I：

暂无

中图分类号：

学科分类号：

摘要：

引用

页码：1550 / 1554

共 11 条

[1] FRICTION AND WEAR OF PLASTIC MATERIALS USED FOR GEARS
TAKANASHI, S
JOURNAL OF JAPAN SOCIETY OF LUBRICATION ENGINEERS, 1981, 26 (05): : 310 - 315
[2] Study for development of plastic worm gears. (1st Report, plastic worm gears filled with fiber and solid lubricant)
Tsukamoto, Naohisa
Maruyama, Hiroki
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1990, 56 (526): : 1548 - 1552
[3] STUDIES ON THE WEAR AND FAILURE OF PLASTIC GEARS (3rd REPORT, THE RELATION BETWEEN HEAT GENERATION AND WEAR).
Shoji, Akira
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1987, 53 (489): : 1087 - 1090
[4] GENERATED HEAT BASED ON HYSTERESIS LOSS OF PLASTIC MATERIALS USED FOR GEARS
SHOJI, A
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1986, 29 (258): : 4479 - 4480
[5] INVESTIGATION ABOUT THE STRENGTH OF PLASTIC GEARS (5TH REPORT; ABRASION OF NYLON GEAR DUE TO THE DIFFERENCE IN MATERIALS OF MATING GEARS).
Tsukamoto, Naohisa
Bulletin of the JSME, 1985, 28 (241): : 1520 - 1527
[6] INVESTIGATION ABOUT THE PREVENTION OF TOOTH PROFILE CHANGE OF PLASTIC GEARS (4TH REPORT, PREVENTING IN TOOTH PROFILE CHANGE BY PLASTIC GEAR MADE FROM LOW FRICTION COEFFICIENT MATERIALS).
Tsukamoto, Naohisa
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1986, 52 (481): : 2491 - 2496
[7] Accuracy and wear resistance of the small injection-molded plastic gears. (For high-strength and heat-resistance plastics filled with fiber or carbon)
Tanaka, Shigetada, 1600, (56):
[8] Theory on designing gears for power transmission (4th report, an equivalent rack and contact ratio)
Honda, Sho
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 2004, 70 (08): : 2508 - 2514
[9] STUDY ON STRENGTH DESIGN METHODS OF PLASTIC GEARS (1ST REPORT, CALCULATION METHOD OF FATIGUE STRENGTH DUE TO STRAIN ENERGY).
Tsukamoto, Naohisa
Taki, Tokihiko
Nishida, Noriteru
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1987, 53 (486): : 432 - 435
[10] Study of FEM simulation of cyclic plastic behavior of face-centered cubic crystal (f.c.c.) crystalline materials: 4th report
Osawa, N
Tomita, Y
Hashimoto, K
PROCEEDINGS OF THE 10TH (2000) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL IV, 2000, : 195 - 202

← 1 2 →