Dense, shaped ceramic/metal composites at ≤1000 °C by the Displacive Compensation of Porosity (DCP) method

被引：24
作者：
Rogers, Kirk A. [1 ]
Kumar, Pragati [1 ]
Citak, Ramazan [1 ]
Sandhage, Ken H. [1 ]
机构：
[1] Dept. of Mat. Sci. and Engineering, Ohio State University, Columbus, OH 43210, United States
来源：
| 1999年 / American Ceramic Soc, Westerville卷 / 82期
关键词：
D O I：
10.1111/j.1151-2916.1999.tb01829.x
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
[41]   Measurement of dynamic mechanical properties of advanced ceramics and ceramic matrix composites at temperatures above 1000 degrees C [J].
Yang, S ;
Gibson, RF ;
Crosbie, GM ;
Allor, RL .
EXPERIMENTAL TECHNIQUES, 1996, 20 (03) :20-23
[42]   Method quickly infiltrates ceramic foams with molten metal to create stable cermet composites [J].
不详 .
AMERICAN CERAMIC SOCIETY BULLETIN, 2017, 96 (03) :13-+
[43]   Production of net-shaped dense metal-carbide-based composites through an infiltration process at intermediate temperature [J].
Davarpanah, Amin ;
Sani, Mohammad Ali Faghihi ;
Shabani, Keivan ;
Bodaghi, Masoud .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2013, 38 :35-39
[44]   Detection of porosity in glass ceramic matrix composites using an ultrasonic multiple-gate C-scan technique [J].
Stubbs, DA ;
Zawada, LP .
MATERIALS EVALUATION, 1996, 54 (07) :827-831
[45]   Surface Reflectance: An Optical Method for Multiscale Curvature Characterization of Wear on Ceramic-Metal Composites [J].
Lemesle, Julie ;
Robache, Frederic ;
Le Goic, Gaetan ;
Mansouri, Alamin ;
Brown, Christopher A. ;
Bigerelle, Maxence .
MATERIALS, 2020, 13 (05)
[46]   Characterization of Cr3C2/Ni ceramic-metal composites produced by direct resistance rapid hot pressing method [J].
Tunc, Buesra ;
Somunkiran, Ilyas ;
Balci, Esra .
EUROPEAN PHYSICAL JOURNAL PLUS, 2025, 140 (06)
[47]   Effect of synthesis method on the mechanical behaviour of near net shaped aluminium metal matrix hybrid composites [J].
Shanmughasundaram, P. ;
Prasanna Venkatesan, D. ;
Kalaiselvi, R. ;
Ashok, N. .
UPB Scientific Bulletin, Series D: Mechanical Engineering, 2021, 83 (02) :189-202
[48]   APPLICATION OF SLIP CASTING METHOD IN FABRICATION OF CERAMIC-METAL COMPOSITES WITH GRADED CONCENTRATION OF METALLIC PARTICLES [J].
Szafran, Mikolaj ;
Bobryk, Ewa ;
Gizowska, Magdalena ;
Rosloniec, Grzegorz ;
Konopka, Katarzyna .
COMPOSITES THEORY AND PRACTICE, 2007, 7 (03) :126-129
[49]   PROPERTIES OF WATER-BASED SLURRIES FOR FABRICATION OF CERAMIC-METAL COMPOSITES BY SLIP CASTING METHOD [J].
Gizowska, M. ;
Konopka, K. ;
Szafran, M. .
ARCHIVES OF METALLURGY AND MATERIALS, 2011, 56 (04) :1105-1110
[50]   PROCESSING METHOD FOR INTERPENETRATING NETWORK METAL-CERAMIC COMPOSITES WITH A NON-LINEAR COMPOSITIONAL GRADIENT [J].
Neukam, M. ;
Willert-Porada, M. .
ADVANCED PROCESSING AND MANUFACTURING TECHNOLOGIES FOR STRUCTURAL AND MULTIFUNCTIONAL MATERIALS II, 2009, 29 (09) :43-51
12345