STUDY ON TOOTH BEARING OF BEVEL GEARS. (1ST REPORT, THEORETICAL CALCULATION OF TOOTH BEARING AND EXPERIMENT).

被引：0

作者：

Terauchi, Yoshio ^{[1
]}

Nagamura, Kazuteru ^{[1
]}

Peng, Wen-Sheng ^{[1
]}

Sentoku, Hirofumi ^{[1
]}

机构：

[1] Hiroshima Univ, Hiroshima, Jpn, Hiroshima Univ, Hiroshima, Jpn

来源：

Bulletin of the JSME | 1986年 / 29卷 / 250期

关键词：

BEARINGS; -; Testing;

D O I：

10.1299/jsme1958.29.1294

中图分类号：

学科分类号：

摘要：

To make clear the relation between the tooth bearing of bevel gear and assembly errors quantitatively and theoretically, a theoretical calculation of tooth bearing was carried out for Gleason and Reinecker type straight bevel gears and for Reinecker type skew bevel gear considering the geometric tooth profile of these gears. And the tooth bearing of each bevel gear was also measured using a tooth bearing tester which was produced for this study. Comparison of the calculated tooth bearing with the experimental result confirmed the propriety of the present calculation method, and revealed the characteristic of tooth bearing of each gear.

引用

页码：1294 / 1302

共 50 条

[1] STUDY ON TOOTH BEARING OF BEVEL GEARS .1. THEORETICAL CALCULATION OF TOOTH BEARING AND EXPERIMENT
TERAUCHI, Y
NAGAMURA, K
PENG, WS
SENTOKU, H
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1986, 29 (250): : 1294 - 1302
[2] Effect of tooth bearing on bending strength of spiral bevel gears
Beijing Univ of Aeronautics and, Astronautics, Beijing, China
Beijing Hangkong Hangtian Daxue Xuebao, 1 (99-103):
[3] STUDY ON TOOTH BEARING OF BEVEL GEARS .2. RELATION BETWEEN TOOTH BEARING AND ASSEMBLY ERROR, SHAFT ANGLE ERROR
TERAUCHI, Y
NAGAMURA, K
PENG, WS
SENTOKU, H
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1986, 29 (250): : 1303 - 1311
[4] Influence of the Spiral Angle on Flank Compression and Root Tooth Tension on Spiral Bevel Gears. A Study of Parameters with Program Chain Bevel Gear Calculation.
Weck, Manfred
Stadtfeld, Hermann J.
VDI-Z, 1986, 128 (13): : 525 - 528
[5] Studies on tooth surface modification of worm gears (2nd report, tooth bearing tests of worm gears with modified tooth surface)
Yoshino, Hidehiro
Ikeno, Kazuhiro
Uchino, Tsukasa
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1996, 62 (598): : 2471 - 2477
[6] On simulation methods of performance of hypoid and spiral bevel gears (1st Report, Definition of reference for tooth form accuracy and method of simulation)
Kubo, Aizoh
Tarutani, Ichiro
Gosselin, Claude
Nonaka, Tetsuya
Aoyama, Noboru
Wang, Zhonghou
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1996, 62 (599): : 2833 - 2841
[7] Effect of fine particle bombarding process on tooth surface properties and tooth surface strength of carburized gears (1st report, effect on tooth surface properties)
Yoshizaki, Masatoshi
Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 2007, 73 (07): : 1923 - 1930
[8] Study for development of plastic worm gears. (1st Report, plastic worm gears filled with fiber and solid lubricant)
Tsukamoto, Naohisa
Maruyama, Hiroki
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1990, 56 (526): : 1548 - 1552
[9] STRENGTH ANALYSIS OF SPUR GEARS INCLUDING RATIO OF CONTACT (1st REPORT, MAINLY ON THE TOOTH DEFLECTION).
Fukunaga, Keigo
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1987, 53 (489): : 1071 - 1076
[10] Simulation on the rotational vibration of helical gears considered tooth separation (1st report, a new stiffness function of helical involute tooth pair)
Cai, Yurong
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1996, 62 (594): : 705 - 712

← 1 2 3 4 5 →