Microcontact Josephson triode fabricated by self-alignment process technique

被引：0
|
作者：
Hirose, Nobumitsu [1 ]
Harada, Yuuichi [1 ]
Yoshimori, Shigeru [1 ]
Kawamura, Mitsuo [1 ]
机构：
[1] Tokyo Inst of Technology, Japan
来源：
Electronics and Communications in Japan, Part II: Electronics (English translation of Denshi Tsushin Gakkai Ronbunshi) | 1990年 / 73卷 / 01期
关键词：
Electric Impedance--Negative Resistance - Oscillators--Millimeter Waves - Signal Detection;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A Josephson triode is a three-terminal superconductive device integrated with three Josephson devices. One of the three devices is used as a local oscillator and the triode can be used as a heterodyne detector. In such an application, since a Josephson device is used as a local oscillator, the frequency of the oscillator can be varied continuously, and the thermal noise is extremely low. However, there is no experimental report regarding the Josephson triode. In this study, microcontact Josephson triodes were fabricated by the self-alignment process technique using electron beam exposure. This device showed a negative resistance in the current-voltage characteristic of the converter junction.
引用
收藏
页码：1 / 7
相关论文
共 50 条
  • [1] A Numerical Study on Patterning Process Including a Self-Alignment Technique of a Microdroplet
    Suh, Youngho
    Son, Gihun
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS B, 2009, 33 (01) : 28 - +
  • [2] Submicrometer polymer transistors fabricated by a mask-free photolithographic self-alignment process
    Buergi, Lukas
    Pfeiffer, Reto
    Winnewisser, Carsten
    APPLIED PHYSICS LETTERS, 2008, 92 (15)
  • [3] FABRICATION OF SELF-ALIGNMENT MICRO-CONTACT JOSEPHSON JUNCTIONS.
    Hirose, Nobumitsu
    Harada, Yuuichi
    Yoshimori, Shigeru
    Kawamura, Mitsuo
    1600, (E69):
  • [4] Predicting Component Self-alignment by Machine Learning Technique
    Martinek, Peter
    Krammer, Oliver
    Farkas, Akos Gabor
    2018 41ST INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE), 2018,
  • [5] Multidimensional VCSEL-array push/pull module fabricated using the self-alignment mounting technique
    Kosaka, H
    Kajita, M
    Sugimoto, Y
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY PART B-ADVANCED PACKAGING, 1998, 21 (04): : 471 - 478
  • [6] Asymmetric implantation self-alignment technique for GaAs MESFETs
    Kimura, Tamotsu
    Inokuchi, Kazuyuki
    Akiyama, Masahiro
    Sakuta, Masaaki
    Japanese Journal of Applied Physics, Part 2: Letters, 1988, 27 (07):
  • [7] Influence of interfacial oxide on self-alignment silicide process
    Huang, JY
    Wu, ST
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 1998, 37 (11): : 6085 - 6089
  • [8] All selective MOVPE crown BH-LD's fabricated by the novel self-alignment process
    Sakata, Y
    Delansay, P
    Inomoto, Y
    Yamaguchi, M
    Murakami, T
    Hasumi, H
    IEEE PHOTONICS TECHNOLOGY LETTERS, 1996, 8 (02) : 179 - 181
  • [9] ASYMMETRIC IMPLANTATION SELF-ALIGNMENT TECHNIQUE FOR GAAS-MESFETS
    KIMURA, T
    INOKUCHI, K
    AKIYAMA, M
    SAKUTA, M
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS & EXPRESS LETTERS, 1988, 27 (07): : L1340 - L1343
  • [10] SELF-ALIGNMENT TECHNIQUE FOR FIBER ATTACHMENT TO GUIDED WAVE DEVICES
    MURPHY, EJ
    RICE, TC
    IEEE JOURNAL OF QUANTUM ELECTRONICS, 1986, 22 (06) : 928 - 932
12345