Immobilization of tritiated water by hydrothermal hot-pressing

Tritium is generally disposed of as an oxide form, and immobilization of tritium oxide with Portland cement is the most popular disposal method. However, the cement solidified body is rather leachable for tritium and is poor in some physical properties. A silicate powder, such as borosilicate glass powder, forms a synthetic rock by the hydrothermal hot pressing (HHP) technique, making it a technique for immobilization of tritium oxide. Tritium oxide with borosilicate glass powder was solidified by the HHP technique. Leachability of tritium from the produced solidified bodies and the behavior of fixed tritium oxide during the heating were studied and discussed. The amount of tritium oxide fixed by the present procedure was almost the same as that fixed by the ordinary cement solidifying procedure. The diffusivity of tritium from the body by this procedure was much lower than that from the cement body and the compressive strength of the body was higher than that of the cement body.