Flatness Defects in Cold-Rolled Strip and Testing of a Flatness Measuring Device.

被引:0
|
作者
Berger, Bernd
Thies, Helmut
Neuscheutz, Eberhard
机构
来源
| 1600年 / 95期
关键词
ROLLING MILL PRACTICE - Cold Rolling;
D O I
暂无
中图分类号
学科分类号
摘要
The nonadjustable flatness defects encountered in cold-rolled strip are due to differences in the length of the strip. In most cases, these defects comprise a number of individual defects. The required measuring accuracy can be ensured only when the length differences in the strip are determined from the distribution of the tensile stress. The developed flatness measuring device operates on this principle. It is designed like a deflection roll and detects the tension-proportional local deflection force for the deflection of the strip around the roll. This flatness measuring device was tested on a three-stand cold rolling mill for dry temper-rolling of extra-light-gage sheet and rolling of double-reduced stock. During these tests, the device worked troublefree.
引用
收藏
相关论文
共 50 条
  • [31] Formation and Prevention of Sliver Defects on the Surface of Cold-rolled Strip
    Gao Wenfang
    ADVANCES IN METALLURGICAL AND MINING ENGINEERING, 2012, 402 : 221 - 226
  • [32] STRESSES IN COLD-ROLLED STRIP
    NIKOLAEV, VA
    STEEL IN THE USSR, 1975, 5 (05): : 273 - 273
  • [33] Flatness evolution of cold-rolled high-strength steel strips during quenching process
    Zhang, Qing-dong
    Lin, Xiao
    Cao, Qiang
    Sun, Chao-yang
    Zhang, Li-Yuan
    Zhang, Bo-yang
    ADVANCES IN MECHANICAL ENGINEERING, 2017, 9 (12):
  • [34] Topometric on-line flatness measuring system for the control of hot strip flatness.
    Degner, M
    Holzknecht, N
    Mentrup, HC
    Muller, U
    Thiemann, G
    Winter, D
    STAHL UND EISEN, 1998, 118 (04): : 79 - +
  • [35] DETECTION OF SURFACE-DEFECTS ON COLD-ROLLED STRIP WITH A LASER SCANNER
    BOHLANDER, P
    MENNICKEN, H
    KLUTH, KH
    KECK, R
    STAHL UND EISEN, 1989, 109 (22): : 1121 - 1124
  • [36] Flatness Prediction of Cold Rolled Strip Based on Deep Neural Network with Improved Activation Function
    Liu, Jingyi
    Song, Shuni
    Wang, Jiayi
    Balaiti, Maimutimin
    Song, Nina
    Li, Sen
    SENSORS, 2022, 22 (02)
  • [37] Formation and prevention of flexure defects at the surface of cold-rolled steel strip
    Mazur V.L.
    Pargamonov E.A.
    Steel in Translation, 2016, 46 (8) : 595 - 601
  • [38] ANALYSIS OF FLATNESS OF HOT ROLLED STEEL STRIP AFTER COOLING
    YOSHIDA, H
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1984, 24 (03) : 212 - 220
  • [39] Width Measurement of Cold-rolled Strip
    SHANG Li-ping ( School of Electr. Eng.
    SemiconductorPhotonicsandTechnology, 2001, (02) : 125 - 128
  • [40] LUBRICANTS FOR THE PRODUCTION OF COLD-ROLLED STRIP
    NITTEL, KD
    STAHL UND EISEN, 1989, 109 (04): : 185 - 188