Influence of mold heat flux on longitudinal surface cracks during high-speed continuous casting of steel slab

被引：0
|
作者：
Nakajima, Keiji [1 ]
Hiraki, Sei [1 ]
Kawamoto, Masayuki [1 ]
Kanazawa, Takashi [1 ]
机构：
[1] Iron and Steel Research Lab
来源：
Sumitomo Search | 1994年 / 55期
关键词：
Addition reactions - Cracks - Defects - Fluxes - Metal castings - Molds - pH - Physical properties - Powder metals - Steel - Temperature measurement - Zirconia;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Influence of mold heat flux on longitudinal cracks were investigated for steel slabs during high casting speed of up to 5m/min with an experimental continuous casting machine. Critical heat flux was found the occurrence of longitudinal cracks on the wide face of slabs were observed in the cast with alminium killed low carbon steel. The reduction of heat flux in mold under the critical value was necessary for the prevention of the defect. It was achieved effectively by the increase of powder basicity and the addition of ZrO2.
引用
收藏
页码：32 / 39
相关论文
共 50 条
  • [31] DEVELOPMENT OF A NEW MOLD OSCILLATION MODE FOR HIGH-SPEED CONTINUOUS-CASTING OF STEEL SLABS
    SUZUKI, M
    MIZUKAMI, H
    KITAGAWA, T
    KAWAKAMI, K
    UCHIDA, S
    KOMATSU, Y
    ISIJ INTERNATIONAL, 1991, 31 (03) : 254 - 261
  • [32] Optimizing the hydraulic characteristics and thermal performance of a slabbing mold for the high-speed continuous casting of steel
    Kuklev, AV
    Tinyakov, VV
    Danilov, VL
    Zarubin, SV
    METALLURGIST, 2001, 45 (1-2) : 23 - 28
  • [33] Optimizing the Hydraulic Characteristics and Thermal Performance of a Slabbing Mold for the High-Speed Continuous Casting of Steel
    A. V. Kuklev
    V. V. Tinyakov
    V. L. Danilov
    S. V. Zarubin
    Metallurgist, 2001, 45 : 23 - 28
  • [34] Thermal Behavior of Hot Copper Plates for Slab Continuous Casting Mold with High Casting Speed
    Meng, Xiangning
    Zhu, Miaoyong
    ISIJ INTERNATIONAL, 2009, 49 (09) : 1356 - 1361
  • [35] Conjugate gradient method with regularization in estimating mold surface heat flux during continuous casting
    Liang, Ce
    Wang, Wanlin
    Wang, Zichao
    Zhang, Haihui
    CASE STUDIES IN THERMAL ENGINEERING, 2024, 56
  • [36] EVALUATION OF MOLD FLUX FOR CONTINUOUS CASTING OF HIGH-ALUMINUM STEEL
    Yan, Wei
    McLean, Alexander
    Yang, Yindong
    Chen, Weiqing
    Barati, Mansoor
    ADVANCES IN MOLTEN SLAGS, FLUXES, AND SALTS, 2016, : 279 - 289
  • [37] Influence of mold flux on surface quality of continuous casting round blooms
    Cheng, Zewei
    Chen, Weiqing
    Jin, Changjia
    Yu, Ping
    Yao, Jiahua
    Kang T'ieh/Iron and Steel (Peking), 2002, 37 (09): : 23 - 25
  • [38] Study on mold flux for thin slab continuous casting of non-oriented electrical steel
    National Engineering and Research Center for Continuous Casting Technology, Central Iron and Steel Research Institute, Beijing 100081, China
    不详
    Kang T'ieh, 2007, 2 (21-23): : 21 - 23
  • [39] Radiative heat transfer through mold flux film during initial solidification in continuous casting of steel
    Cho, J
    Shibata, H
    Emi, T
    Suzuki, M
    ISIJ INTERNATIONAL, 1998, 38 (03) : 268 - 275
  • [40] Fuzzy Identification of the Time- and Space-Dependent Internal Surface Heat Flux of Slab Continuous Casting Mold
    Wang, Guangjun
    Wan, Shibin
    Chen, Hong
    Wang, Kun
    Lv, Cai
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2018, 140 (12):
12345