STRESS ANALYSIS OF A TIRE UNDER VERTICAL LOAD BY A FINITE ELEMENT METHOD.

被引:2
|
作者
Kaga, H.
Okamoto, K.
Tozawa, Y.
机构
关键词
D O I
10.2346/1.2167231
中图分类号
学科分类号
摘要
An analysis by the finite element method and a related computer program is presented for an axisymmetric solid under asymmetric loads. Calculations are carried out on displacements and internal stresses and strains of a radial tire loaded on a road wheel of 600-mm diameter, a road wheel of 1707-mm diameter, and a flat plate. Agreement between calculated and experimental displacements and cord forces is quite satisfactory. The principal shear strain concentrates at the belt edge, and the strain energy increases with decreasing drum diameter. Tire temperature measurements show that the strain energy in the tire is closely related to the internal temperature rise.
引用
收藏
页码:102 / 118
相关论文
共 50 条
  • [1] ANALYSIS OF MAGNETOSTRICTION ON EXTERNAL LOAD BY FINITE ELEMENT METHOD.
    Enokizono, M.
    Todaka, T.
    Shirafuji, Y.
    1600, (TJMJ-1):
  • [2] Ultimate Load Analysis of Reinforced Brackets by the Finite Element Method.
    Krejci, Heidemarie
    Mang, Herbert
    Beton- und Stahlbetonbau, 1986, 81 (01) : 15 - 21
  • [3] ANALYSIS OF OVERHEAD WIRE DISPLACEMENT AND STRESS BY FINITE ELEMENT METHOD.
    Taniguchi, Sigekazu
    Quarterly Report of RTRI (Railway Technical Research Institute) (Japan), 1986, 27 (03): : 84 - 87
  • [4] Stress Determination on Flanges by the Finite Element Method.
    Szczepanek, R.
    Saering, A.
    Strohmeier, K.
    VGB-Kraftwerkstechnik, 1983, 63 (11): : 1003 - 1006
  • [5] ANALYSIS OF THE A FORGING METHOD BY THE FINITE ELEMENT METHOD.
    Sun, Jiexian
    Guo, Huiguang
    Jixie goneheng Xuebao, 1986, 22 (04): : 47 - 55
  • [6] DYNAMIC SUBSTRUCTURING METHOD FOR ELASTOIMPACT STRESS ANALYSIS USING FINITE ELEMENT METHOD.
    Asano, Naoki
    1600, (26):
  • [7] STRESS AND CONTACT PRESSURE ANALYSIS OF PREMIUM CONNECTIONS BY FINITE ELEMENT METHOD.
    Kawashima, Hisakazu
    Morita, Yoshiyasu
    Ishihara, Koichiro
    1600,
  • [8] STRESS ANALYSIS OF A HIGH HEAD FRANCIS RUNNER BY FINITE ELEMENT METHOD.
    Pardhi, M.S.
    Dasgupta, S.K.
    1600, (67): : 1 - 2
  • [9] ANALYSIS OF THE NONLINEAR AND ULTIMATE LOAD BEHAVIOUR OF PLATED STRUCTURES BY THE FINITE ELEMENT METHOD.
    Evans, H.R.
    Peska, D.O.
    Taherian, A.R.
    1600, (02):
  • [10] Finite element analysis of a 6.45-14 bias tire under contact load
    Ghoreishy, MHR
    IRANIAN POLYMER JOURNAL, 2001, 10 (01) : 45 - 52