CHEMICAL POLARIZATION OF 12Cr18Ni9Ti STEEL.

被引：0

作者：

Sorokina, L.A. ^{[1
]}

Rusetskaya, A.N. ^{[1
]}

Chinova, M.P. ^{[1
]}

机构：

[1] 'Medinstrument' Scientific &, Industrial Assoc, Kazan', USSR, 'Medinstrument' Scientific & Industrial Assoc, Kazan', USSR

来源：

Journal of applied chemistry of the USSR | 1987年 / 60卷 / 8 pt 2期

关键词：

ACIDS; -; ELECTROLYTES; SOLUTIONS; Viscosity;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A detailed study was carried out for the development of an effective electrolyte for the chemical polarization of 12Cr18Ni9Ti steel. Preliminary data on the kinetics of the CP (Chemical Polarization) process in the developed electrolyte obtained by the temperature-kinetic method in the region of potentials near that of chemical dissolution indicate that the activation energies for the chemical dissolution of steel are commensurate for the initial acid mixture and the developed electrolyte, in both cases being 5. 4-9. 5 kcal/mole. The developed CP electrolyte gave excellent results during production of an experimental batch of small parts made from 12Cr18Ni9Ti steel for flexible endoscopy instruments.

引用

页码：1756 / 1758

共 50 条

[1] CHEMICAL POLARIZATION OF 12CR18NI9TI STEEL
SOROKINA, LA
RUSETSKAYA, AN
CHINOVA, MP
JOURNAL OF APPLIED CHEMISTRY OF THE USSR, 1987, 60 (08): : 1756 - 1758
[2] Wettability of Stainless Steel 12Cr18Ni9Ti with a Liquid Near-Eutectic Tin–Lithium Alloy
Alchagirov, B.B.
Kanametova, O. Kh.
Lesev, V.N.
Dadashev, R.H.
Dyshekova, F.F.
High Temperature, 2024, 62 (02) : 180 - 187
[3] Temperature dependences of wetting angles of steel 12Cr18Ni9Ti and ceramics by the melts with least additions of alkali metals
Gubzhokov, M. M.
Ponegev, M. Kh
Sozaeva, A. B.
Sozaev, V. A.
13TH INTERNATIONAL CONFERENCE ON LIQUID AND AMORPHOUS METALS, 2008, 98
[4] Microstructural defect evolution in neutron - Irradiated 12Cr18Ni9Ti stainless steel during subsequent isochronous annealing
Tsay, K. V.
Maksimkin, O. P.
Turubarova, L. G.
Rofman, O. V.
Garner, F. A.
JOURNAL OF NUCLEAR MATERIALS, 2013, 439 (1-3) : 148 - 158
[5] Production of porous oxide coatings with ultrafine crystalline structure on medical implants fabricated from alloy 12Cr18Ni9Ti
Rodionov, Igor V.
Fomina, Marina A.
Fomin, Aleksandr A.
Poshivalova, Elena Yu.
Zakharevich, Andrey M.
NANOTECHNOLOGY VII, 2015, 9519
[6] INTERNAL STRESS AND STRUCTURE IN ELEVATED TEMPERATURE CREEP OF AN 18Cr-12Ni STEEL.
Vitkova, Libuse
Milicka, Karel
Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 1983, 74 (01): : 12 - 15
[7] Influence of irradiation and post-irradiation thermal treatment on microstructure and properties of 12Cr18Ni9Ti steel, irradiated to 5 dpa in the WWR-K research reactor
Tsai, K. V.
Maksimkin, O. P.
Turubarova, L. G.
PROBLEMS OF ATOMIC SCIENCE AND TECHNOLOGY, 2008, (02): : 100 - 107
[8] STRUCTURE AND PHASE TRANSFORMATIONS IN COLD-WORKED Fe-18Cr-9Ni STEEL.
Lur'e, S.A.
Potapov, N.N.
Demin, E.A.
1600, (20): : 5 - 6
[9] AES STUDY OF THE ANODIC OXIDE FILM ON 1Cr18Ni9 STAINLESS STEEL.
Lin Rongfu
Daoxuan, Dai
Shuzhong, Dong
Zou Huiliang
Luo Xinghua
Jinshu Xuebao/Acta Metallurgica Sinica, 1982, 18 (05): : 586 - 591
[10] Cause of corrosion cracking of steel 1Cr18Ni9Ti
Liu, Ximing
Lian, Jianshe
Jinshu Rechuli/Heat Treatment of Metals, 2000, (02): : 44 - 45

← 1 2 3 4 5 →