High temperature hot ductility of the 08Kh18N10T steel and its electroslag welded joint

被引：0
|
作者：
Astaf'ev, A.A.
Lepekhina, L.I.
Batieva, N.M.
Viktorov, N.A.
机构：
来源：
Tyazheloe Mashinostroenie | 1992年 / 12期
关键词：
Facilities - High temperature effects - Nuclear reactors - Plasticity testing - Stainless steel - Stamping - Steel analysis - Welds;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The 08Kh18N10T steel is widely used by the ATOMMASH Industrial corporation for the NPP pieces bottoms manufacture. Investigation results have been presented, which include hot ductility of the above steel and its welded joints made by the electroslag welding. Samples were tested for rapture within the 1050-700°C temperature range. For this steel and its welded joints dependence of reduction of area on temperature as well as fracture structure have been given. It has been shown that at 950-100° welded joint hot ductility is 3 times lower as compared to the basic metal. but at 700°C it increases by 3 times. So bottoms are recommended to be manufactured of 08Kh18N10T steel at 700-750°C.
引用
收藏
页码：30 / 33
相关论文
共 50 条
  • [21] Evaluation of the Service Life of a Hip Joint Made of 08Kh18N10T Steel by the Methods of Fracture Mechanics
    E. I. Lychkovs'kyi
    Materials Science, 2005, 41 : 247 - 252
  • [22] Influence of the External Polarization Potential on the Tribocorrosion Behavior of 08Kh18N10T Steel
    V. I. Pokhmurs’kyi
    M. S. Khoma
    V. A. Vynar
    Kh. B. Vasyliv
    N. B. Rats’ka
    Materials Science, 2018, 54 : 279 - 285
  • [23] Influence of the External Polarization Potential on the Tribocorrosion Behavior of 08Kh18N10T Steel
    Pokhmurs'kyi, V. I.
    Khoma, M. S.
    Vynar, V. A.
    Vasyliv, Kh. B.
    Rats'ka, N. B.
    MATERIALS SCIENCE, 2018, 54 (02) : 279 - 285
  • [24] Influence of molybdenum disulfide on SCC of 08Kh18N10T steel in steam generator of NPP*
    Melekhov, R
    Tubielevich, K
    Krucan, A
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2000, 51 (12): : 880 - 889
  • [25] ACOUSTIC-EMISSION DURING CORROSION CRACKING OF AUSTENITIC STEEL 08KH18N10T
    DROBOT, YB
    LAZAREV, AM
    ODNOPOZOV, LY
    KHRUSTALEVA, AF
    PROTECTION OF METALS, 1980, 16 (01): : 38 - 39
  • [26] Study of Steel 08Kh18N10T Centrifugally-Cast Pipe Billet Properties
    Barichko, B. V.
    Kosmatskii, Ya. I.
    Rushchits, S. V.
    Akhmed'yanov, A. M.
    Gaslenko, M. I.
    Voskhodov, V. B.
    Zubkov, A. M.
    METALLURGIST, 2013, 57 (3-4) : 298 - 302
  • [27] Study of Steel 08Kh18N10T Centrifugally-Cast Pipe Billet Properties
    B. V. Barichko
    Ya. I. Kosmatskii
    S. V. Rushchits
    A. M. Akhmed’yanov
    M. I. Gaslenko
    V. B. Voskhodov
    A. M. Zubkov
    Metallurgist, 2013, 57 : 298 - 302
  • [28] Adding Tungsten Semicarbide to 08Kh18N10T Corrosion-Resistant Steel and Its Effect on the Mechanical Properties
    Chumanov I.V.
    Anikeev A.N.
    Sedukhin V.V.
    Steel in Translation, 2022, 52 (02) : 129 - 133
  • [29] Corrosion cracking of 08Kh18N10T steel in conditions of steam-generator operation at NPP
    Melekhov, R.K.
    Smiyan, O.D.
    Fiziko-Khimicheskaya Mekhanika Materialov, 1994, 30 (01): : 113 - 122
  • [30] Corrosion cracking of welded joints of pipelines from steel 08Kh18N10T in power units with RBMK-type reactors
    A. S. Zubchenko
    I. L. Kharina
    A. E. Runov
    A. V. Mukhin
    N. Yu. Korovin
    Metal Science and Heat Treatment, 2007, 49 : 82 - 88
12345