Effect of strain rate and temperature of tensile test on Luders strain in Al-Mg alloys

被引：0

作者：

Shonan Institute of Technology, Fujisawashi, Tsujidou-nishikaigan, Japan ^{[1
]}

不详 ^{[2
]}

不详 ^{[3
]}

不详 ^{[4
]}

机构：

来源：

Z Metallkd | / 6卷 / 427-433期

关键词：

High temperature effects - Morphology - Strain rate - Tensile testing;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The effects of strain rate and temperature of tensile test on Luders strain in Al-4.4%Mg (commercial 5182 alloy) alloy were investigated and the results were compared with the reported case of Al-low Mg (5052) alloy. The morphologies of the yielded zones developed on the specimen surface during the tensile test were observed. The Luders strain was larger and more complex in Al-high Mg alloys than in Al-low Mg alloys. In Al-high Mg alloys strained with low strain rate, the serrated yielding due to the Portevin-Le Chatelier effect occurred concurrently with Luders strain. The pinning points inducing Luders strain were, for the most part, formed during furnace cooling at temperatures between 350-450 °C.

引用

共 50 条

[31] Mg effect on the cryogenic temperature toughness of Al-Mg alloys
Son, Kwangtae
Kassner, Michael E.
Lee, Tae-Kyu
Lee, Ji-Woon
MATERIALS & DESIGN, 2022, 224
[32] Effect of Mg content on Portevin-Le Chatelier band strain in Al-Mg sheet alloys
Kang, Jidong
Mishra, Raja K.
Wilkinson, David S.
Hopperstad, Odd S.
PHILOSOPHICAL MAGAZINE LETTERS, 2012, 92 (11) : 647 - 655
[33] INFLUENCE OF TEMPERATURE AND STRAIN RATE ON PORTEVIN-LE CHATELIER EFFECT OF AL-MG SINGLE-CRYSTALS
TENSI, HM
PLESS, W
ZEITSCHRIFT FUR METALLKUNDE, 1972, 36 (08): : 479 - &
[34] Influence of strain rate and temperature on the compressive ductility of Al, Mg and Ti alloys
El-Magd, E
Abouridouane, M
JOURNAL DE PHYSIQUE IV, 2003, 110 : 15 - 20
[35] Strain hardening and dynamic recovery during deformation of Al-Mg alloys
Kral, R
PHYSICA STATUS SOLIDI A-APPLIED RESEARCH, 1996, 157 (02): : 255 - 263
[36] The strain-rate dependence of flow stress and work-hardening rate in three Al-Mg alloys
Yao, XX
Zajac, S
SCANDINAVIAN JOURNAL OF METALLURGY, 2000, 29 (03) : 101 - 107
[37] Strain rate sensitivity and strain macrolocalization in serrated yielding of Al−Mg alloys
M. M. Krishtal
Metal Science and Heat Treatment, 1997, 39 : 390 - 395
[38] Effects of strain rate and internal hydrogen on tensile properties of Al-10%Mg alloys
Hojo T.
Kikuchi M.
Akiyama E.
Keikinzoku/Journal of Japan Institute of Light Metals, 2023, 73 (05): : 223 - 229
[39] Effects of room temperature strain rate and Al content on the tensile properties of FeAl alloys
Li, Dingqiang
Lin, Dongliang
Shan, Aidang
Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 1997, 13 (01): : 1 - 5
[40] High strain rate superplastic forming of a new Al-Mg alloy
Uchida, H
Asano, M
Yoshida, H
TOWARDS INNOVATION IN SUPERPLASTICITY II, 1999, 304-3 : 309 - 314

← 1 2 3 4 5 →