Effect of strain rate and temperature of tensile test on Luders strain in Al-Mg alloys

被引：0

作者：

Shonan Institute of Technology, Fujisawashi, Tsujidou-nishikaigan, Japan ^{[1
]}

不详 ^{[2
]}

不详 ^{[3
]}

不详 ^{[4
]}

机构：

来源：

Z Metallkd | / 6卷 / 427-433期

关键词：

High temperature effects - Morphology - Strain rate - Tensile testing;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The effects of strain rate and temperature of tensile test on Luders strain in Al-4.4%Mg (commercial 5182 alloy) alloy were investigated and the results were compared with the reported case of Al-low Mg (5052) alloy. The morphologies of the yielded zones developed on the specimen surface during the tensile test were observed. The Luders strain was larger and more complex in Al-high Mg alloys than in Al-low Mg alloys. In Al-high Mg alloys strained with low strain rate, the serrated yielding due to the Portevin-Le Chatelier effect occurred concurrently with Luders strain. The pinning points inducing Luders strain were, for the most part, formed during furnace cooling at temperatures between 350-450 °C.

引用

共 50 条

[21] Warm-temperature tensile ductility in Al-Mg alloys
Taleff, EM
Henshall, GA
Nieh, TG
Lesuer, DR
Wadsworth, J
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1998, 29 (3A): : 1081 - 1091
[22] Plastic Strain Localization and Its Stages in Al-Mg Alloys
Tretyakova, T., V
Wildemann, V. E.
PHYSICAL MESOMECHANICS, 2018, 21 (04) : 314 - 319
[23] Plastic Strain Localization and Its Stages in Al-Mg Alloys
T. V. Tretyakova
V. E. Wildemann
Physical Mesomechanics, 2018, 21 : 314 - 319
[24] Effect of grain size on strain rate sensitivity of cryomilled Al-Mg alloy
Ahn, Byungmin
Mitra, Rahul
Lavernia, Enrique J.
Nutt, Steven R.
JOURNAL OF MATERIALS SCIENCE, 2010, 45 (17) : 4790 - 4795
[25] Effect of temperature and strain rate fluctuation on forming limit curve of 5083 Al-Mg alloy sheet
Hou, Bo
Huang, Yong
Ding, Mingming
Dong, Hongji
ADVANCES IN MECHANICAL ENGINEERING, 2022, 14 (06)
[26] ANOMALOUS STRAIN-RATE SENSITIVITY OF FLOW-STRESS IN SUPERCONDUCTING AL AND AL-MG ALLOYS
IIDA, F
SUZUKI, T
KURAMOTO, E
TAKEUCHI, S
ACTA METALLURGICA, 1979, 27 (04): : 637 - 647
[27] STRAIN RATE CHANGE TRANSIENTS IN AL-MG SINGLE CRYSTALS
MACEWEN, SR
RAMASWAM.B
METALLURGICAL TRANSACTIONS, 1971, 2 (07): : 1851 - &
[28] On the effects of the Mg content on the critical strain for the jerky flow of Al-Mg alloys
Ait-Amokhtar, H.
Fressengeas, C.
Bouabdallah, K.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 631 : 209 - 213
[29] The effect of large plastic deformation on elevated temperature mechanical behavior of dynamic strain aging Al-Mg alloys
Meng, C.
Hu, W.
Sandloebes, S.
Korte-Kerzel, S.
Gottstein, G.
ACTA MATERIALIA, 2019, 181 : 67 - 77
[30] Strain Rate Dependences of the Critical Stresses in Aluminum Al-Mg Alloys upon Impact Loads
Evstifeev, A. D.
Smirnov, I. V.
Petrov, Yu. V.
PHYSICS OF THE SOLID STATE, 2020, 62 (11) : 1967 - 1972

← 1 2 3 4 5 →