Effect of strain rate and temperature of tensile test on Luders strain in Al-Mg alloys

被引：0

作者：

Shonan Institute of Technology, Fujisawashi, Tsujidou-nishikaigan, Japan ^{[1
]}

不详 ^{[2
]}

不详 ^{[3
]}

不详 ^{[4
]}

机构：

来源：

Z Metallkd | / 6卷 / 427-433期

关键词：

High temperature effects - Morphology - Strain rate - Tensile testing;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The effects of strain rate and temperature of tensile test on Luders strain in Al-4.4%Mg (commercial 5182 alloy) alloy were investigated and the results were compared with the reported case of Al-low Mg (5052) alloy. The morphologies of the yielded zones developed on the specimen surface during the tensile test were observed. The Luders strain was larger and more complex in Al-high Mg alloys than in Al-low Mg alloys. In Al-high Mg alloys strained with low strain rate, the serrated yielding due to the Portevin-Le Chatelier effect occurred concurrently with Luders strain. The pinning points inducing Luders strain were, for the most part, formed during furnace cooling at temperatures between 350-450 °C.

引用

共 50 条

[1] Effect of strain rate and temperature of tensile test on Luders strain in Al-Mg alloys
Inagaki, A
Komatsubara, T
Inagaki, H
ZEITSCHRIFT FUR METALLKUNDE, 1999, 90 (06): : 427 - 433
[2] Effect of Strain Rate and Temperature of Tensile Test on Lüders Strain in Al-Mg Alloys
Inagaki, Atsuya
Komatsubara, Toshio
Inagaki, Hirosuke
International Journal of Materials Research, 1999, 90 (06): : 427 - 433
[3] Modeling uniaxial, temperature and strain rate dependent behavior of Al-Mg alloys
Toros, S.
Ozturk, F.
COMPUTATIONAL MATERIALS SCIENCE, 2010, 49 (02) : 333 - 339
[4] Influence of temperature and strain rate of tensile testing and grain size on yield point elongation in Al-Mg alloys
Inagaki, Atsuya
Komatsubara, Toshio
Inagaki, Hirosuke
Keikinzoku/Journal of Japan Institute of Light Metals, 1998, 48 (07): : 312 - 316
[5] On the strain rate dependence of the critical strain for plastic instabilities in Al-Mg alloys
Chibane, N.
Ait-Amokhtar, H.
Fressengeas, C.
SCRIPTA MATERIALIA, 2017, 130 : 252 - 255
[6] Strain rate sensitivity and strain macrolocalization in serrated yielding of Al-Mg alloys
Krishtal, MM
METAL SCIENCE AND HEAT TREATMENT, 1997, 39 (9-10) : 390 - 395
[7] Effects of Mg concentration, test temperature and strain rate on serration of Al-Mg system alloys and cause of its generation
Nakayama, Y
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2000, 64 (12) : 1257 - 1262
[8] Parameters affecting strain rate sensitivity in Al-Mg alloys
Mukhopadhyay, J
HOT DEFORMATION OF ALUMINUM ALLOYS III, 2003, : 391 - 398
[9] High strain rate deformation behavior of Al-Mg alloys
Masuda, T
Kobayashi, T
Toda, H
IMPACT ENGINEERING AND APPLICATION, VOLS I AND II, 2001, : 363 - 368
[10] LUDERS BANDS IN AL-MG ALLOYS
MORRIS, JG
MATERIALS SCIENCE AND ENGINEERING, 1970, 5 (05): : 299 - &

← 1 2 3 4 5 →