ESTIMATING FLAW SIZE IN PRESSURE VESSEL WELDS.

被引：0
作者：
Meyer, Hans-Jurgen
机构：
来源：
Welding Design and Fabrication | 1977年 / 50卷 / 11期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In practice, standard reference flaws in calibration blocks serve as a base of comparison for real flaws. These calibration blocks are of various thicknesses and contain reflectors of known size and orientation. The distance between the reflectors is known. Engineers have run tests to conform to ASME Section V and to West German specification HP5/3. The HP standard is the more severe, if echo amplitude is the only consideration.
引用
收藏
页码：78 / 81
相关论文
共 50 条
[41]   FATIGUE CRACK PROPAGATION AT SPOT WELDS. [J].
Cooper, J.F. ;
Smith, R.A. .
Metal construction, 1986, 18 (06)
[42]   CALCULATION OF STRAINS AND STRESSES IN CIRCULAR WELDS. [J].
Sagalevich, V.M. ;
Mezentseva, S.A. .
Welding Production (English translation of Svarochnoe Proizvodstvo), 1974, 21 (09) :11-16
[43]   SIGNIFICANCE OF BLUNT FLAWS IN PIPELINE GIRTH WELDS. [J].
Kasen, M.B. .
Welding Journal (Miami, Fla), 1983, 62 (05)
[44]   SEGREGATION OF ALLOYING ELEMENTS IN MMA PIPELINE WELDS. [J].
Gouch, A.J. ;
Muir, H. .
Metal construction, 1981, 13 (03) :150-158
[45]   DYNAMIC CONTACT RESISTANCE OF SERIES SPOT WELDS. [J].
Savage, W.F. ;
Nippes, E.F. ;
Wassell, F.A. .
Welding Journal (Miami, Fla), 1978, 57 (02) :43-50
[46]   Ultimate Load Tests on Long Fillet Welds. [J].
Fischer, M. ;
Wenk, P. .
Stahlbau, 1986, 55 (07) :193-199
[47]   ULTRASONIC INSPECTION OF AUSTENITIC STAINLESS STEEL WELDS. [J].
Nardoni, Giuseppe ;
Berzolla, Aleardo ;
Baldi, Mario ;
Silva, Giuseppe .
Avesta Stainless Bulletin, 1979, 2 (02) :3-13
[48]   EXPERIMENTS ON SOME ARBITRARILY LOADED FILLET WELDS. [J].
Sanaei, E. ;
Kamtekar, A.G. .
Welding Journal (Miami, Fla), 1988, 67 (05)
[49]   Influence of Cold Deformation on the Fracture Behavior of Welds. [J].
Povse, Th. ;
Wallner, F. ;
Ornig, H. .
Berg- und Huettenmaennische Monatshefte, 1973, 118 (03) :66-72
[50]   Comments on the Ultrasonic Testing of Austenitic Steel Welds. [J].
Anon .
Rivista Italiana della Saldatura, 1985, 37 (04) :241-247
12345