Discussion: Effect of Polymer Additives on Jet Cavitation (Hoyt, J. W., 1976, ASME J. Fluids Eng., 98, pp. 106–111)

被引：0

作者：

Gates, E.M. ^{[1
]}

机构：

[1] Division of Engineering and Applied Science, California Institute of Technology, Pasadena,CA, United States

来源：

| 1600年 / American Society of Mechanical Engineers (ASME)卷 / 98期

关键词：

Compendex;

D O I：

10.1115/1.3448160

中图分类号：

学科分类号：

摘要：

引用

共 50 条

[1] Discussion: A Photographic Study of Cavitation in Jet Flow (Hoyt, J. W., and Taylor, J., 1981, ASME J. Fluids Eng., 103, pp. 14–18)
Shima, A.
Tsujino, T.
Journal of Fluids Engineering, Transactions of the ASME, 1981, 103 (02):
[2] Closure to Discussion of ‘The Grüneisen Parameter in Fluids’ (1984, ASME J. Fluids Eng., 106, pp. 200–201)
Arp, V.
Persichetti, J.M.
Chen, Guo-Bang
Journal of Fluids Engineering, Transactions of the ASME, 1984, 106 (02):
[3] Closure to Discussion of ‘Cavitation Inception in Pumps’ (1982, ASME J. Fluids Eng., 104, pp. 265–266)
McNulty, P.J.
Pearsall, I.S.
Journal of Fluids Engineering, Transactions of the ASME, 1982, 104 (02):
[4] Discussion: Periodic Flow in a Wind Tunnel Produced by Rotating Shutters (Charnay, G., and Mathieu, J., 1976, ASME J. Fluids Eng., 98, pp. 278–281)
Fejer, A.A.
Morkovin, M.V.
Journal of Fluids Engineering, Transactions of the ASME, 1976, 98 (02): : 281 - 282
[5] Closure to Discussion of ‘Study of Flow and Thrust in Nozzle-Flapper Valves’ (1976, ASME J. Fluids Eng., 98, pp. 331–332)
Hayashi, S.
Matsui, T.
Ito, T.
1600, American Society of Mechanical Engineers (ASME) (98):
[6] Discussion: Oil Slick Instability and the Entrainment Failure of Oil Containment Booms (Leibovich, Sidney, 1976, ASME J. Fluids Eng., 98, pp. 98–103)
Kordyban, E.
Journal of Fluids Engineering, Transactions of the ASME, 1976, 98 (01):
[7] Closure to Discussions of ‘A Photographic Study of Cavitation in Jet Flow’ (1981, ASME J. Fluids Eng., 103, pp. 371–372)
Hoyt, J.W.
Taylor, J.
Journal of Fluids Engineering, Transactions of the ASME, 1981, 103 (02): : 371 - 372
[8] Closure to Discussions of ‘Laminar Compressible Flow between Rotating Disks’ (1976, ASME J. Fluids Eng., 98, pp. 388–389)
Garrison, P.W.
Harvey, D.W.
Catton, I.
1600, American Society of Mechanical Engineers (ASME) (98):
[9] Closure to Discussions of ‘A Separated and Reattached Flow on a Blunt Flat Plate’ (1976, ASME J. Fluids Eng., 98, pp. 84–86)
Ota, Terukazu
Itasaka, Masaaki
Journal of Fluids Engineering, Transactions of the ASME, 1976, 98 (01):
[10] Closure to Discussion of ‘A New Instrument in Cavitation Research: The Cavitation Susceptibility Meter’ (1982, ASME J. Fluids Eng., 104, pp. 141–142)
Oldenziel, D.M.
Journal of Fluids Engineering, Transactions of the ASME, 1982, 104 (02):

← 1 2 3 4 5 →