NEW STEELS CUT TOOL AND MATERIAL COSTS.

被引：0

作者：

Anon

机构：

来源：

Machinery and Production Engineering | 1986年 / 144卷 / 3702期

关键词：

CUTTING TOOLS - Wear - METAL CUTTING - Efficiency;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Dean, Smith & Grace, a machine tool builder in Keighley, Yorkshire, has switched from a proprietary make of free-cutting alloy steel to a new 817M40T (heat-treated) steel known as IQ (improved quality) for manufacturing various machine transmission components. Initial tests carried out by DS&G on IQ steel were performed on 75 and 160 mm diameter bar. Cutting speeds for turning were raised from the 350 ft/min maximum found practical with standard (untreated) 817M40T to the 550 ft/min consistently used for the original proprietary steel. The original feed rates and depths of cut were restored; and the results were, says DS&G, satisfactory. Tool life was increased by as much as 300 percent, compared with that obtained when cutting standard 817M40T, and tolerances for size, geometry and surface finish could be held.

引用

页码：34 / 35

共 50 条

[21] REUSABLE TIE RODS CUT FORMING COSTS.
Keogh, James Edward
Construction Methods and Equipment, 1974, 56 (01):
[22] BALANCE ETHYLENE PRODUCT SLATE, CUT COSTS.
Wett, Ted
Oil and Gas Journal, 1985, 83 (35): : 46 - 48
[23] USING AN INSULATION AUDIT TO CUT ENERGY COSTS.
Miner, John B.
Chemical Engineering (New York), 1981, 88 (22): : 105 - 110
[24] HOW COMPANIES CAN CUT TELEPHONE COSTS.
La Blanc, Elizabeth A.
1600, (49):
[25] IMPROVED TRANSPORT FACILITIES CUT COKE COSTS.
Vander Laan R. W.
1600, (82):
[26] PALLET REPAIR AND LEASING PROGRAMS CUT COSTS.
Anon
Modern Materials Handling, 1987, 42 (10) : 67 - 69
[27] HOW TO CUT ON-SITE LABOR COSTS.
Anon
World construction English ed., 1984, 37 (10): : 32 - 35
[28] COMPUTER HELPS MELVIN STONE CUT COSTS.
Schroder, Eric
Pit and Quarry, 1984, 77 (05): : 72 - 75
[29] Considerate Steelmaking Helps Cut Steel Costs.
Brolin, Tommy
Mathiesen, Mihkel
Ortenblad, Bertil
Teknisk Tidskrift, 1976, 107 (03): : 20 - 23
[30] ROLLED RINGS CAN CUT PRODUCTION COSTS.
Anon
Tooling and production, 1980, 46 (03): : 99 - 101

← 1 2 3 4 5 →