Analytical study of critical heat flux in two-phase thermosyphon: relationship between maximum falling liquid rate and critical heat flux

被引：0
|
作者：
Saga Univ, Saga, Japan [1 ]
机构：
来源：
J Heat Transfer Trans ASME | / 2卷 / 422-428期
关键词：
Calculations - Films - Flow of fluids - Liquids - Mathematical models - Vapors;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
An analytical study has been done on the critical heat flux of a two-phase thermosyphon, in which a liquid film and a vapor flow exist in a countercurrent annular flow. The CHF point on the thermosyphon is proved to correspond to a maximum falling liquid rate fed to the thermosyphon, which can be determined from three equations of momentum, its partial derivative with void fraction, and mass balance in the thermosyphon. This maximum point, furthermore, becomes identical to the point at which an envelope line generated from the momentum equation and its partial derivative intersects the mass balance line. The CHF calculated from the maximum liquid rate is found to be in fairly good agreement with the existing CHF data.
引用
收藏
相关论文
共 50 条
  • [31] Analytical study on characteristics of critical heat flux in saturated two-phase flow under zero to comparatively low mass flux in vertical heated channels
    Sudo, Y
    HEAT TRANSFER SCIENCE AND TECHNOLOGY 1996, 1996, : 382 - 387
  • [32] Dynamics of dry spots development and critical heat flux in falling liquid film
    Pavlenko, AN
    Lel, VV
    HEAT TRANSFER 1998, VOL 2: GENERAL PAPERS, 1998, : 331 - 337
  • [33] Investigation of the influence of orientation on critical heat flux for flow boiling with two-phase inlet
    Konishi, Christopher
    Mudawar, Issam
    Hasan, Mohammad M.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 61 : 176 - 190
  • [34] COMPUTATIONAL FLUID DYNAMICS MODELING OF TWO-PHASE BOILING FLOW AND CRITICAL HEAT FLUX
    Tentner, Adrian
    Merzari, Elia
    Vegendla, Prasad
    PROCEEDINGS OF THE 22ND INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING - 2014, VOL 4, 2014,
  • [35] Dependence of critical heat flux on the rate of increase in heat supply
    Delov, M., I
    Kutsenko, K., V
    Kuzmenkov, D. M.
    Lavrukhin, A. A.
    Laouar, S.
    Litvintsova, Yu E.
    Marchenko, A. S.
    Maslov, Yu A.
    VI INTERNATIONAL SCIENTIFIC SCHOOL-CONFERENCE OF YOUNG SCIENTISTS MODERN PROBLEMS OF PHYSICS AND TECHNOLOGIES, 2018, 945
  • [36] REDUCING INSTABILITY AND ENHANCING CRITICAL HEAT FLUX USING INTEGRATED MICROPILLARS IN TWO-PHASE MICROCHANNEL HEAT SINKS
    Zhu, Y.
    Antao, D. S.
    Bian, D. W.
    Zhang, T. J.
    Wang, E. N.
    2015 TRANSDUCERS - 2015 18TH INTERNATIONAL CONFERENCE ON SOLID-STATE SENSORS, ACTUATORS AND MICROSYSTEMS (TRANSDUCERS), 2015, : 343 - 346
  • [37] Study on critical heat flux of high velocity liquid flow
    Sakurai, Hisashi
    Koizumi, Yasuo
    Ohtake, Hiroyasu
    PROCEEDINGS OF THE ASME/JSME THERMAL ENGINEERING SUMMER HEAT TRANSFER CONFERENCE 2007, VOL 2, 2007, : 549 - 554
  • [38] Critical heat flux in falling films undergoing nucleate boiling
    Alhusseini, AA
    Hoke, BC
    Chen, JC
    CONVECTIVE FLOW BOILING, 1996, : 339 - 344
  • [39] Influence of non-uniform wall heat flux on critical heat flux prediction in upward flowing round pipe two-phase flow
    Wang, Zhao
    Turan, Ali
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2021, 164
  • [40] Critical heat flux limiting the effective cooling performance of two-phase cooling with an interlayer microchannel
    Park, Jong-Yoon
    Peng, Lu
    Choi, Jin-Woo
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2019, 25 (07): : 2831 - 2840
12345