Use of Preheated Air during the Ignition of a Sintering Charge.

被引:0
|
作者
Kotov, V.G.
Nakhaev, P.E.
Vlasov, V.G.
Zevin, S.L.
机构
来源
Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya | 1982年 / 01期
关键词
FUEL ECONOMY;
D O I
暂无
中图分类号
学科分类号
摘要
Under conditions of a constant temperature-heat level of the process of external heating of charge layer each percent of increase in the oxygen content in the hearth gases during the combustion of natural gas, coke oven gas or blast furnace gas requires an increase in the air preheating temperature amounting to an average of 120 to 140 degree C. An increase in the air preheating temperature for each 100 degree C in the range from 0 to 600 degree C ensures a decrease in the consumption of coke oven gas and natural gas amounting to an average of 6% and a decrease in the consumption of blast furnace gas amounting to an average of 3. 5%. The use in the ignition hearth of air preheated to 300 degree C makes it possible, as a result of recovery of heat from the finished sinter, to increase the oxygen content in the hearth gases by 2% and to reduce the consumption of natural gas or coke oven gas by approximately 17%, and that of blast furnace gas by approximately 6. 6%.
引用
收藏
页码:20 / 24
相关论文
共 50 条
  • [41] HOMOGENEOUS CHARGE CATALYTIC IGNITION OF ETHANOL-WATER/AIR MIXTURES IN A RECIPROCATING ENGINE
    Cordon, Dan
    Beyerlein, Steve
    Cherry, Mark
    Steciak, Judi
    IMECE 2008: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, VOL 3, 2008, : 455 - 464
  • [42] Modeling and Control of a Heated Air Intake Homogeneous Charge Compression Ignition (HCCI) Engine
    Lee, Donghoon
    Stefanopoulou, Anna G.
    Makkapati, Satheesh
    Jankovic, Mrdjan
    2010 AMERICAN CONTROL CONFERENCE, 2010, : 3817 - 3823
  • [43] Observer-Based Cylinder Air Charge Estimation for Spark-Ignition Engines
    Wang, Zhe
    Zhu, Qilun
    Prucka, Robert
    Prucka, Michael
    Dourra, Hussein
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2017, 139 (10):
  • [44] Ignition delay control of DME/air and EtOH/air homogeneous autoignition with the use of various additives
    Al Tingas, Efstathios
    Kyritsis, Dimitrios C.
    Goussis, Dimitris A.
    FUEL, 2016, 169 : 15 - 24
  • [46] Auto-Ignition and Numerical Analysis on High-Pressure Combustion of Premixed Methane-Air mixtures in Highly Preheated and Diluted Environment
    Garnayak, Subrat
    Elbaz, Ayman M.
    Kuti, Olawole
    Dash, Sukanta Kumar
    Roberts, William L.
    Reddy, V. Mahendra
    COMBUSTION SCIENCE AND TECHNOLOGY, 2022, 194 (15) : 3132 - 3154
  • [47] Interaction of lithium-titanium ceramics with air during sintering
    Ghyngazov S.A.
    Lisenko E.N.
    Petyukevich M.S.
    Frangulyan T.S.
    Russian Physics Journal, 2007, 50 (2) : 134 - 139
  • [48] Effect of the Density of Iron Nanopowders on the Parameters of Their Ignition during Heating in Air
    M. I. Alymov
    S. G. Vadchenko
    E. V. Suvorova
    V. A. Zelenskii
    A. B. Ankudinov
    Doklady Physical Chemistry, 2019, 488 : 143 - 145
  • [49] Effect of the Density of Iron Nanopowders on the Parameters of Their Ignition during Heating in Air
    Alymov, M., I
    Vadchenko, S. G.
    Suvorova, E., V
    Zelenskii, V. A.
    Ankudinov, A. B.
    DOKLADY PHYSICAL CHEMISTRY, 2019, 488 (2) : 143 - 145
  • [50] Feasibility of spontaneous ignition during air injection in light oil reservoirs
    Huang, Siyuan
    Sheng, James J.
    FUEL, 2018, 226 : 698 - 708