Metallization of PVC.

被引：0
|
作者：
Kadrewa, Mariana
Georgiewa, Milka
Lasarowa, Prolet
机构：
来源：
Plaste und Kautschuk | 1975年 / 22卷 / 12期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
As the pure PVC is not suitable for metallizing, in the reported study the samples were used which were composed of the polymer modified by addition of such fillers as calcium carbonate, talcum, kaolin and barium carbonate. The adhesive strength (adhesion) between metallic films and polymeric substrates was measured and results are tabulated, plotted in curves and discussed. Electron microscopic examination of interface layers was also conducted. It is shown that the best results were obtained with carbonates.
引用
收藏
页码：983 / 985
相关论文
共 50 条
  • [21] STUDY ON THE GPC CONCENTRATION EFFECT OF PVC.
    Huadong Huagong Xueyuan Xuebao, 1988, 3 (393-398):
  • [22] EFFECTS OF NICKEL ON MECHANICAL PROPERTIES OF PVC.
    Kusy, Robert P.
    Turner, Derek T.
    1600, (29):
  • [23] LOW TEMPERATURE THERMAL CONDUCTIVITY OF PVC.
    Ventura, G.
    Martelli, V.
    ASTROPARTICLE, PARTICLE AND SPACE PHYSICS, DETECTORS AND MEDICAL PHYSICS APPLICATIONS, 2010, 5 : 145 - 149
  • [24] ADDITIVES FOR PLASTICS - IMPACT MODIFIERS FOR PVC.
    Purcell Jr., T.O.
    DeValeria, R.E.
    Plastics Engineering, 1976, 32 (04) : 46 - 49
  • [25] EFFECTIVENESS OF LUBRICANTS IN THE THERMOMECHANICAL DEGRADATION OF PVC.
    Minsker, K.S.
    Malyshev, L.N.
    Karpacheva, L.I.
    Zavarova, T.B.
    Fedoseeva, T.G.
    Soviet Plastics (English translation of Plasticheskie Massy), 1972, (09): : 57 - 60
  • [26] Automatic Control of Radiation Degradation of PVC.
    Lerke, Iwona
    Lerke, Gerard
    Polimery/Polymers, 1976, 21 (08): : 357 - 359
  • [27] PERFORMANCE OF IMPACT MODIFIERS IN RIGID PVC.
    Aarts, M.
    Hall, P.D.
    Meier, A.J.
    1600, (75):
  • [28] New Approach to PVC Processing: Design of Twinscrew Extruders for PVC.
    Feistkorn, Werner
    Plastverarbeiter, 1984, 35 (04): : 148 - 151
  • [29] Diffusion Phenomena of Phosphoric Acid in Flexible PVC.
    Rueprich, G.
    Murow, W.A.
    Baumann, K.H.
    Plaste und Kautschuk, 1974, 21 (12): : 922 - 924
  • [30] CHOOSING THE OPTIMUM HEAT STABILIZERS FOR RIGID PVC.
    Silkotch, Mitchel S.
    Plastics Engineering, 1983, 39 (09): : 33 - 36
12345