STRUCTURAL SAFETY: BUILDING MATERIALS AND TESTS.

被引：0

|

作者：

Read, Richard

机构：

来源：

| 1978年 / 6卷 / 01期

关键词：

Compendex;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

STRUCTURAL DESIGN

引用

收藏

页码：3 / 5

相关论文

共 50 条

[41] Testing and specifications: National and international organizations coordinate lubricant specifications and tests.
Holdmeyer, Dan
Tribology and Lubrication Technology, 2024, 80 (05) : 26 - 28
[42] Elastic Parameters and the Utimate Strength of Saturated Sands in Drained Triaxial Compression Tests.
Ricceri, G.
Soranzo, M.
Rivista Italiana di Geotecnica, 1980, 14 (02): : 133 - 143
[43] Determination of the Fatigue Curve through a Minimum Number of Short-Duration Tests.
Leroy, A.
Viseur, B.
1600, (20):
[44] Influence of Sample Geometry on the Crack Propagation Rate in Stress Corrosion Cracking Tests.
Marci, G.
Bazant, E.
Zeitschrift fuer Werkstofftechnik/Materials Technology and Testing, 1977, 8 (07): : 235 - 239
[45] DETERMINATION OF THE DYNAMIC MATERIAL PROPERTIES OF SOILS FROM THE RESULTS OF STATIC SHEAR TESTS.
Kavazanjian Jr., Edward
Hadj-Hamou, Tarik
Report - Stanford University, John A. Blume Earthquake Engineering Center, 1980, (45):
[46] Some Properties of Zirconium Alloys Determined by the Differential Stress Technique during Creep Tests.
Novak, Miroslav
Hamersky, Milos
Cadek, Josef
Kovove Materialy, 1982, 20 (02): : 173 - 181
[47] Installation for High-temperature Cyclic Creep and Low-cycle Fatigue Tests.
Osasyuk, V.V.
Kuzema, Yu.A.
Man'ko, V.D.
Problemy Prochnosti, 1982, (01):
[48] MUTUAL OVERLAP COEFFICIENT AND WEAR DEBRIS MOTION IN DRY OSCILLATING FRICTION AND WEAR TESTS.
Play, D.
1600, (28):
[49] FERROGRAPHIC ANALYSIS OF WEAR DEBRIS FROM FULL-SCALE BEARING FATIGUE TESTS.
Jones Jr., William R.
Loewenthal, Stuart H.
NASA Technical Paper, 1979, (1511):
[50] SRUGE RESPONSE CHARACTERISTICS OF HV PIPE-TYPE CABLE FROM FIELD TESTS.
Melvold, D.J.
Cheng, T.C.
1978,

← 1 2 3 4 5 →