Hydrostatic forming of machine components and construction elements

被引：0

作者：

Anon ^{[1
]}

机构：

[1] Sankt-Peterburgskij Filial Inst, Mashinovedeniya im. Blagonravova, Sankt-Peterburg, Russia

来源：

Problemy Prochnosti i Nadezhnos'ti Mashin | 1993年 / 04期

关键词：

Alloys - Deformation - Hydrostatic pressing - Machine components - Mechanical properties - Metal forming - Physical properties - Pipelines - Plasticity - Steel - Structural members;

D O I：

暂无

中图分类号：

TG [金属学与金属工艺];

学科分类号：

0805 ;

摘要：

The process is dedicated to the production of elements for pipelines, body components and special units made of structural steels and alloys by plastic deformation of sheet and tube billets. The process offers higher plasticity of a material to be deformed without its heating. Moreover, workpieces can be made with minimum passages due to higher plastic deformation (hundreds of percent) per a pass. The utilization factor is equal to 0.9 - 0.95. The labour intensity is far less than that of machining, casting, welding. Better physical, mechanical and service characteristics are noted.

引用

共 50 条

[1] Investigations on tailored forming components as tribologically loaded machine elements
Pape, Florian
Coors, Timm
Poll, Gerhard
FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH, 2018, 82 (04): : 311 - 318
[2] Hydrostatic deformation of machine elements and members
1600,
[3] HYDROSTATIC FORMING OF HOLLOW COMPONENTS WITH THICKENED AREAS.
Soviet Forging and Sheet Metal Stamping Technology (English Translation of Kuznechno-Shtampovochno, 1986, (01): : 55 - 57
[4] Hydrostatic shaping of machine parts and structural elements
Anon
Problemy Prochnosti i Nadezhnos'ti Mashin, 1992, (02):
[5] COLD PLASTIC FORMING OF TOOTHED MACHINE ELEMENTS
TOBLASZ, C
MECHANIK MIESIECZNIK NAUKOWO-TECHNICZNY, 1970, 43 (12): : 671 - &
[6] Controlled Forming of Machine Components Operating Characteristics
Vasiliev, A. S.
2ND INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING (ICIE-2016), 2016, 150 : 975 - 979
[7] EXPOSIVE FORMING OF MACHINE-TOOL ELEMENTS
GRUSZCZY.C
MECHANIK MIESIECZNIK NAUKOWO-TECHNICZNY, 1972, 45 (08): : 470 - &
[8] Ultrasonic characterization of the contact of components in machine elements
Quinn, AM
Drinkwater, BW
Dwyer-Joyce, RS
REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 20A AND 20B, 2001, 557 : 1501 - 1508
[9] CONCEPTUAL DEVELOPMENTS IN DESIGN COMPONENTS AND MACHINE ELEMENTS
RIVIN, EI
JOURNAL OF MECHANICAL DESIGN, 1995, 117 : 33 - 41
[10] CONSTRUCTION ELEMENTS FOR TOOLING-MACHINE PROPULSION
FROHLICH, G
RUOFF, W
WERKSTATTSTECHNIK ZEITSCHRIFT FUR INDUSTRIELLE FERTIGUNG, 1985, 75 (12): : 753 - 755

← 1 2 3 4 5 →