Cooling system for the RIKEN Ring Cyclotron

被引：0
|
作者：
Inoue, Toshihiko
Motonaga, Shoshichi
机构：
来源：
Rika Gaku Kenkyujo hokoku | 1988年 / 64卷 / 03期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The system was constructed to be capable of processing an estimated power consumption of 6 MW after completion of the facilities. The present power consumption is about 2 MW. The system consists of three parts: the ring cyclotron and a part of beam transport line, various experimental apparatus and the AVF cyclotron, and an evacuation system. In the former two, deionized city water is used as primary coolant and a combination of a heat exchanger and a cooling tower is employed. In the latter undeionized city water is circulated in a cooling tower. The temperature of the coolant after cooling a device is planned not to exceed 50°C. The design value of the coolant pressure is set below 10 kg/cm2. The status of the system is displayed on a control console through a computer system.
引用
收藏
页码：110 / 121
相关论文
共 50 条
  • [1] THE RADIOFREQUENCY SYSTEM OF THE RIKEN RING CYCLOTRON
    FUJISAWA, T
    OGIWARA, K
    KOHARA, S
    OIKAWA, Y
    YOKOYAMA, I
    NAGASE, M
    CHIBA, Y
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 1990, 292 (01): : 1 - 11
  • [2] CONTROL-SYSTEM OF THE RIKEN RING CYCLOTRON
    WADA, T
    FUJITA, J
    SHIMIZU, K
    YOKOYAMA, I
    KAMBARA, T
    KAMITSUBO, H
    IEEE TRANSACTIONS ON NUCLEAR SCIENCE, 1985, 32 (05) : 2095 - 2097
  • [3] Trim coil system for the RIKEN superconducting ring cyclotron
    Kim, JW
    Goto, A
    Mitsumoto, T
    Kubo, T
    Okuno, H
    Kawaguchi, T
    Tominaka, T
    Fujishima, S
    Ikegamai, K
    Sakamoto, N
    Yokouchi, S
    Morikawa, T
    Yano, Y
    PROCEEDINGS OF THE 1997 PARTICLE ACCELERATOR CONFERENCE, VOLS 1-3: PLENARY AND SPECIAL SESSIONS ACCELERATORS AND STORAGE RINGS - BEAM DYNAMICS, INSTRUMENTATION, AND CONTROLS, 1998, : 3422 - 3424
  • [4] RIKEN RING CYCLOTRON PROJECT
    KAMITSUBO, H
    JOURNAL OF THE ATOMIC ENERGY SOCIETY OF JAPAN, 1987, 29 (07): : 576 - 583
  • [5] The superconducting ring cyclotron in RIKEN
    Okuno, H.
    Ohnishi, J.
    Yamada, K.
    Fukunishi, N.
    Ikegami, K.
    Maie, T.
    Hasebe, H.
    Hamanaka, M.
    Kase, M.
    Goto, A.
    Yano, Y.
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2007, 17 (02) : 1063 - 1068
  • [6] Orbit analysis of the RIKEN Superconducting Ring Cyclotron
    Mitsumoto, T
    Goto, A
    Kim, JW
    Ohnishi, J
    Kawaguchi, T
    Okuno, H
    Fujishima, S
    Tominaka, T
    Yano, Y
    CYCLOTRONS AND THEIR APPLICATIONS 1998, 1999, : 507 - 510
  • [7] Orbit analysis for the RIKEN superconducting ring cyclotron
    Mitsumoto, T.
    Goto, A.
    Kawaguchi, T.
    Kim, J.-W.
    Tanaka, Y.
    Kubo, T.
    Okuno, H.
    Tominaka, T.
    Fujishima, S.
    Ikegami, K.
    Sakamoto, N.
    Morikawa, T.
    Yokouchi, S.
    Yano, Y.
    Proceedings of the IEEE Particle Accelerator Conference, 1998, 1 : 1069 - 1071
  • [8] Quench analysis of RIKEN superconducting ring cyclotron
    Tominaka, T
    Fukunishi, N
    Goto, A
    Ohnishi, J
    Okuno, H
    Yano, Y
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2002, 12 (01) : 1587 - 1590
  • [9] Sector magnets for the RIKEN superconducting ring cyclotron
    Goto, A
    Okuno, H
    Ohnishi, J
    Tominaka, T
    Fujishima, S
    Ikegami, K
    Fukunishi, N
    Miyazawa, Y
    Mitsumoto, T
    Yano, Y
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2004, 14 (02) : 300 - 305
  • [10] STATUS REPORT ON THE RIKEN RING CYCLOTRON.
    Motonaga, S.
    IEEE Transactions on Nuclear Science, 1985, NS-32 (05)
12345