Application of design of experiment technique for metal blanking processes optimization

被引：1

作者：

Hambli, Ridha ^{[1
]}

Potiron, Alain ^{[2
]}

Kobi, Abdessamad ^{[1
]}

机构：

[1] ISTIA-LASQUO, 49000 Angers, 62, avenue Notre dame du Lac

[2] ENSAM-LPMI, 49035 Angers Cedex, 2, boulevard du Ronceray

来源：

Mecanique et Industries | 2003年 / 4卷 / 03期

关键词：

Blanking; Clearance; Design of experiment; Sheet thickness; Tool wear;

D O I：

10.1016/S1296-2139(03)00035-6

中图分类号：

学科分类号：

摘要：

The blanking of metal parts is subjected to a variety of process parameters. In this paper, an experimental investigation of the blanking process was carried out using tools with four different wear states and four different clearances. The aim was to study the effects of the interaction between the clearance, the wear state of the tool and the sheet metal thickness on the evolution of the blanking force and the geometry of the sheared profile. Designed experiments are an efficient and cost-effective way to model and analyze the relationships that describe process variations. The results of the proposed experimental investigation show that there is no universal optimal clearance value. Whether clearance should be set at 5% or 10% ultimately depends on the priorities of the practitioners. In the present investigation, mathematical relationship describing the fracture zone depth, the fracture angle and the blanking force are proposed. © 2003 Éditions scientifiques et médicales Elsevier SAS. All rights reserved.

引用

页码：175 / 180

页数：5

共 12 条

[1]

Lange K., Handbook of Metal Forming, (1985)

[2]

Osaki T., Yamasaki S.S., Effect of the geometry of cutting edge of tool in blanking process and punching, Memoir of the Faculty of Engineering, Kyushu University, 38, 4, pp. 371-395, (1984)

[3]

Kalpakjian S., Manufacturing Processes for Engineering Materials 2nd Edn., (1991)

[4]

Hambli R., Étude Expérimentale, Numérique et Théorique du Découpage des Tôles en Vue de l'Optimisation du Procédé, (1996)

[5]

Lambert Y., Bignonnet A., Roesch L., Prévision du comportement en fatigue de structures minces en aciers à haute résistance dual-phase et microalliés, Mémoires et Études Scientifiques Revue de Métallurgie, pp. 209-225, (1991)

[6]

Grosset E., Maillard A., Turbat A., Usure en Découpage, (1987)

[7]

Grosset E., Peyre P., Cherry P., Gasnier J., Tournier C., Les dépôts PVD et CVD en poinçonnage et relevage de collerette, CETIM, Informations, 111, pp. 55-61, (1989)

[8]

Proceedings of the 7th International Conference on Sheet Metal (SheMet'99), (1999)

[9]

Proceedings of the 8th International Conference on Sheet Metal (SheMet'2000), (2000)

[10]

Jana S., Ong N.S., Effect of punch clearance in the high-speed blanking of the thick metal using an accelerator for mechanical press, J. Mech. Working Techn., 19, pp. 55-72, (1989)

← 1 2 →