Comparing the short and ultrashort pulsed laser ablation of LiF

被引:0
作者
机构
[1] Henley, Simon J.
[2] Fuge, Gareth M.
[3] Ashfold, Michael N.R.
来源
Henley, S.J. (s.henley@eim.surrey.ac.uk) | 1600年 / American Institute of Physics Inc.卷 / 97期
基金
英国工程与自然科学研究理事会;
关键词
Evaporation - Ground state - Imaging techniques - Lithium - Photoluminescence - Sputtering - Thermal plumes - Ultrashort pulses - Velocity measurement;
D O I
暂无
中图分类号
学科分类号
摘要
Pulsed laser ablation of LiF was studied using both nanosecond (ns) and femtosecond (fs) pulses at 248 nm. Optical emission from electronically excited Li and F atoms in the plume of ejected material was investigated by wavelength, time and spatially resolved imaging methods. Careful analysis of images of species selected optical emission yielded estimates of the mean velocities of the Li+ ions arising in both excitation schemes (~11 and ~13 kms, respectively), and highlighted the dramatic effects of radiation trapping, most notably by the reabsorption of Li (2p→2s) emission by ground state Li atoms in the ns ablation studies. Plumes formed by fs excitation are found to contain a higher fraction of energeticelectrically excited components, including excited F atoms and ions, indicative of an explosive boiling mechanism, whereas the ablation plume resulting from ns ablation is deduced to arise primarily from thermal evaporation of the transiently heated target surface. The amount of target material removed per shot is significantly less in the case of fs excitation. The density (and size) of unwanted droplets in films grown by fs ablation is much smaller than in the case of ns ablation, especially on substrates mounted in an off-axis ablation geometry, implying that hydrodynamic sputtering is much reduced by the use of short pulses and that fs ablation must be the preferred route to forming very thin LiF coatings. © 2005 American Institute of Physics.
引用
收藏
相关论文
empty
未找到相关数据