Continuous Mixing of Low Viscosity and High Viscosity Polymer Melts in a Modular Co-@Rotating Twin Screw Extruder

被引：0
作者：
Lee, S.-H.
White, J. L.
机构：
来源：
| 1997年 / 12期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
[41]   MIXING IN A SELF-WIPING CO-ROTATING TWIN-SCREW EXTRUDER, AN EXPERIMENTAL-STUDY [J].
LI, Y ;
SENOUCI, A ;
LAIFOOK, RA ;
SMITH, AC .
PLASTICS AND RUBBER PROCESSING AND APPLICATIONS, 1989, 11 (04) :207-214
[42]   Simulation Analysis on Refining Process of the Rubber Desulfurization in the Co-Rotating Twin Screw Extruder and the Mixing Mill [J].
Lu X. ;
Ren D. ;
Zhang L. .
Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, 2017, 33 (12) :85-91
[43]   Continuous polymerization of polyetheramide tri-block copolymer in a modular intermeshing counter-rotating twin screw extruder [J].
Lee, BH ;
White, JL .
ANTEC '99: PLASTICS BRIDGING THE MILLENNIA, CONFERENCE PROCEEDINGS, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPECIAL AREAS;, 1999, :22-26
[44]   Transient compositional effects from feeders in a starved flow modular co-rotating twin-screw extruder [J].
Kim, EK ;
White, JL .
POLYMER ENGINEERING AND SCIENCE, 2002, 42 (11) :2084-2093
[45]   Experimental Investigation and Flow Modeling of Slippage Induced by Additives in Polyolefins in a Modular Co-rotating Twin Screw Extruder [J].
Ban, K. ;
Bumm, S. H. ;
White, J. L. .
INTERNATIONAL POLYMER PROCESSING, 2009, 24 (03) :242-252
[46]   Ninth of a series - Pioneer of the modular co-rotating twin screw extruder - Rudolf Erdmenger (1911-1991) [J].
White, JL .
INTERNATIONAL POLYMER PROCESSING, 2001, 16 (02) :86-86
[47]   Simulation of thermal degradation, peroxide induced degradation, and maleation of polypropylene in a modular co-rotating twin screw extruder [J].
Kim, B ;
White, JL .
POLYMER ENGINEERING AND SCIENCE, 1997, 37 (03) :576-589
[48]   Superposed hydrodynamic disturbances from feeders in a starved flow modular intermeshing co-rotating twin screw extruder [J].
Kim, EK ;
White, JL .
POLYMER ENGINEERING AND SCIENCE, 2001, 41 (02) :232-239
[49]   Morphology development of in situ compatibilized semicrystalline polymer blends in a co-rotating twin-screw extruder [J].
Cartier, H ;
Hu, GH .
POLYMER ENGINEERING AND SCIENCE, 1999, 39 (06) :996-1013
[50]   Simulation of Multiphase Flow and Mixing in a Conveying Element of a Co-Rotating Twin-Screw Extruder by Using SPH [J].
Dong, Tianwen ;
Wu, Jianchun ;
Ruan, Yufei ;
Huang, Jiawen ;
Jiang, Shiyu .
INTERNATIONAL JOURNAL OF CHEMICAL ENGINEERING, 2023, 2023
12345