Fatigue crack propagation in lead-free solder under mode I and II loading

被引：0

作者：

Tanaka, Keisuke ^{[1
]}

Iwata, Yoshifumi ^{[1
]}

Akiniwa, Yoshiaki ^{[1
]}

机构：

[1] Department of Mechanical Engineering, Meijo University, Nagoya-shi, Aichi, 468-8502, 1-501 Shiogamaguchi, Tempaku-ku

来源：

Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A | 2009年 / 75卷 / 760期

关键词：

Crack propagation; Fatigue; J-integral; Lead-free solder; Mode I; Mode II;

D O I：

10.1299/kikaia.75.1738

中图分类号：

学科分类号：

摘要：

Crack propagation tests of lead-free solder were conducted using center-cracked plates (CCP) for tension-compression loading (mode I loading) and thin-walled tubular specimens for torsional loading (mode II loading). Both specimens have an initial slit as a crack starter. The path of crack propagation under mode I loading was macroscopically straight, and perpendicular to the maximum principal stress direction. In tubular specimens under mode II loading, at the high strain amplitude, the crack propagate in shear mode along the maximum shear direction. At low strain amplitude, four cracks are formed from the initial silt and propagate showing macroscopically tensile-mode propagation. The crack propagation rate is expressed as a power function of the Jintegral range for both mode I and II loadings. The relation was not much different between mode I and II loadings. Fatigue crack propagation takes place by joining microcracks formed along the maximum shear planes ahead of the crack tip. At high strain ranges of mode II loading, microcracks ahead of the main crack tip were long and abundant, and their connection with the main crack gave rise shear-mode crack propagation.

引用

页码：1738 / 1745

页数：7

共 16 条

[11]

Rice J.R., Paris P.C., Merkle Jr. J.G., Some further results of J-integral analysis and estimate, ASTM STP 536, Progress in Flaw Growth and Fracture Toughness Testing, pp. 231-245, (1973)

[12]

Dowling, geometry effects and J integral approach to elastic plastic fatigue crack growth, ASTM STP 590, Mechanics of Crack Growth, pp. 82-103, (1976)

[13]

Hoshide T., Yamada A., Tanaka K., Evaluation of J integral for center-cracked plate under gross and general yiedings and its application to fatigue crack growth, Journal of the Society of Materials Science, Japan, 31, 347, pp. 810-816, (1982)

[14]

Tada H., Paris P.C., Irwin G.R., The Stress Analysis of Cracks Handbook, (2000)

[15]

Pinna C., Doquet V., The preferred fatigue crack propagation mode in a M250 maraging steel loaded in shear, Fatigue & Fracture of Engineering Materials & Structures, 22, pp. 173-183, (1999)

[16]

Tanaka K., Fatigue crack propagation under complex loading, (review), Transactions of the Japan Society of Mechanical Engineers, Series A, 74, 742, pp. 786-795, (2008)

← 1 2 →