Gate location optimization scheme for plastic injection molding

被引：0

作者：

Zhai, Ming ^{[1
]}

Lam, Yeecheong ^{[1
]}

Au, Chikit ^{[1
]}

机构：

[1] School of Mechanical and Production Engineering, Nanyang Technological University, Singapore 639798

来源：

E-Polymers | 2009年

关键词：

17;

D O I：

10.1515/epoly.2009.9.1.1515

中图分类号：

学科分类号：

摘要：

Gate location of injection molding is vital to achieve high quality plastic part. The determination of gate location is an important issue in mold design. A computationally efficient scheme based on flow path is proposed to locate the optimum gate for achieving balanced flow. The range of filling time is employed as objective function. Comparisons were made between the flow path search scheme and the existing adjacent node evaluation scheme, and between the objective function of the range of filling time and the existing standard deviation of filling time. The two examples investigated indicated that the search routine based on the concept of flow path is more efficient computationally and the range of filling time is a better objective function to reflect the uniformity of fill.

引用

共 17 条

[1]

Pandelidis I., Zou Q., Polymer Engineering and Science, 30, 15, (1990)

[2]

Britton G.A., Deng Y.-M., Lam Y.C., Journal of Injection Molding Technology, 6, 4, (2002)

[3]

Lam Y.C., Britton G.A., Deng Y.-M., International Journal of Advanced Manufacturing Technology, (2003)

[4]

Lee B.H., Kim B.H., Polymer-Plastics Technology and Engineering, 34, 5, (1995)

[5]

Park S.J., Kwon T.H., Polymer Engineering and Science, 38, 9, (1998)

[6]

Lam Y.C., Zhai L.Y., Tai K., Fok S.C., International Journal of Production Research, (2003)

[7]

Lam Y.C., Seow L.W., Polymer Engineering and Science, 40, 6, (2000)

[8]

Jin S., Lam Y.C., Journal of Injection Molding Technology, 6, 4, (2002)

[9]

Bociaga E., Polimery, 45, 2, (2000)

[10]

Bociaga E., Polimery, 46, 9, (2001)

← 1 2 →