Evaluation of applicability of bottom ash as inorganic filler

被引：0

作者：

Oh, Min-Taek ^{[1
]}

Sung, Yong Joo ^{[1
]}

机构：

[1] Dept. of Biobased Materials, College of Agriculture and Life Science, Chungnam Natl. Univ., Daejeon

来源：

Palpu Chongi Gisul/Journal of Korea Technical Association of the Pulp and Paper Industry | 2012年 / 44卷 / 05期

关键词：

Bottom ash; Brightness; Bulk; Filler; Pretreatment;

D O I：

10.7584/ktappi.2012.44.5.080

中图分类号：

学科分类号：

摘要：

The disposal of the bottom ash originated from a thermoelectric power plant which used the pulverized coal, has been an important issue of the power plants. In order to find the possibleway of recycling of the bottom ash, the applicability of the bottom ash as an inorganic filler for papermakingwas investigated in this study. The pretreatment with acid were applied for upgrading the properties of bottom ash. The effects of the addition of the bottom ash to the different pulp stocks, Sw-BKP, DIP(Deinked Pulp), Sw-UBKP were evaluated in terms of the change in paper properties. The brightness and tensile strength decreased as the increase of the amount of the bottom ash addition. The bulk and the opacity were increased by the addition of bottom ash. The pretreatment of bottom ash resulted in the increase of improvement of the brightness and the strength properties comparing with those of untreated bottom ash.

引用

页码：80 / 86

页数：6

共 9 条

[1]

Chun B.-S., Yeoh Y.-H., A study on the recycling of coal ash as structural backfill materials, J. of Korea Soc of Ocean Eng, 14, 50, pp. 74-79, (2000)

[2]

Park H.Y., Seo S.I., Kim S.C., Kang D.S., Reburning of bottom ash in a coal fired powder plant and its effect on the plant management, J. Korea Solid Wastes Eng. Soc., 24, 5, pp. 472-481, (2007)

[3]

Shin W., Lim D., Chun B., A study on self-hardening characteristics of coal ash by mixing ratio of fly ash and bottom ash, J. Korea Geo-environmental Soc, 11, 6, pp. 85-91, (2010)

[4]

Kim K.D., Kang S.G., Manufacturing artificial lightweight aggregates using coal bottom ash and clay, J. Korea Cryst. Tech., 17, 6, pp. 277-282, (2007)

[5]

Jung S.-H., Choe M.-J., Lee B.-C., Choi Y.-J., An experimental study on bottom ash for utilization of subbase materials, J. Korea Recycled Construction Resource Institute, 5, 4, pp. 89-98, (2010)

[6]

Kim K.D., Kang S.G., Manufacturing artificial lightweight aggregates using coal bottom ash and clay, J. Korean Crystal Growth and Crystal Technology, 17, 6, pp. 277-282, (2007)

[7]

Kim C.-H., Lee J.-Y., Lee H.-J., Gwak H.-J., Study on fly ash as a new raw material in paperboard process, J. Korea TAPPI, 42, 4, pp. 78-83, (2010)

[8]

Choi S.-H., Kim B.-Y., Stock preparations for the opacity improvement of printing paper, J. Korea TAPPI, 32, 1, pp. 1-9, (2000)

[9]

Kern W., Puotinen D.A., Cleaning solutions based on hydrogen peroxide for use in silicon semiconductor technology, RCA Rev., 31, pp. 187-205, (1970)

← 1 →