Experimental investigations into forces acting between cluster MR effect pad and workpiece surface

被引：4
作者：
Bai, Zhenwei [1 ]
Yan, Qiusheng [1 ]
Xu, Xipeng [2 ]
机构：
[1] School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou
[2] Engineering Research Center for Brittle Materials Machining, Huaqiao University, Xiamen
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2015年 / 51卷 / 15期
关键词：
Machining parameters; MR effect pad; Normal force; Tangential force;
D O I：
10.3901/JME.2015.15.190
中图分类号：
学科分类号：
摘要：
A viscoplastic cluster MR effect pad is formed between the surface of polishing plate and the workpiece. Under the effect of a magnetic field, MR effect pad remove material from the surface being machined, which has been applied to polish a large variety of brittle materials, ranging from optical glasses to hard crystals, to a nanometer surface. Knowledge of forces acting is important to understand the mechanism of material removal for MR effect pad. Three-component dynamometer instrumentation is used to on-line record the normal force and tangential force acting on the workpiece through the MR effect pad. It is found that the maximal tangential force Ft value is 32.25 N and the maximal normal force Fn value is 62.35 N, and the ratio between them is about 0.46-0.77. The most contribution is observed that of the machining gap and magnetic field strength on the forces developed on the workpiece surface, followed by CIPs and abrasives concentration, the fluid flow rate, the polishing plate speed, while the least contribution is noticed by the feed distance and feed rate of workpiece. The forces from the cluster MR effect pad and the ratio Ft/Fn increase with the increase in the hardness of the workpieces. The forces acting on the harder workpieces have the characteristic with low normal pressure and high shear force, and this is beneficial to improve the quality of super-smooth planarization polishing. ©, 2015, Journal of Mechanical Engineering. All right reserved.
引用
收藏
页码：190 / 197
页数：7
相关论文
共 17 条
  • [1] Jain V.K., Magnetic field assisted abrasive based micro-/nano-finishing, Journal of Materials Processing Technology, 20, pp. 6022-6038, (2009)
  • [2] Schinhaerl M., Vogt C., Geiss A., Et al., Forces acting between polishing tool and workpieces surface in magnetorheological finishing, Optical Engineering + Applications. International Society for Optics and Photonics, (2008)
  • [3] Yan Q., Yan J., Xu X., Et al., Ultra smooth planarization technique based on the cluster magnetorheological effect, Advanced Materials Rsearch, 35, pp. 18-23, (2010)
  • [4] Pan J., Yan Q., Xu X., Et al., Cluster magnetorheological effect plane polishing on SiC single crystal slice, China Mechanical Engineering, 24, 18, pp. 2495-2499, (2013)
  • [5] Kim W., Lee S., Min B., Surface finishing and evaluation of three-dimensional silicon microchannel using magnetorheological fluid, Transactions of the ASME, 126, pp. 772-778, (2004)
  • [6] Bai Z., Yan Q., Lu J., Et al., Advanced nano-finishing process of SrTiO3 substrate by cluster MR-effect plate, Materials Science Forum, 770, pp. 150-154, (2014)
  • [7] Bai Z., Yan Q., Lu J., Et al., Polishing AlN substrate by cluster magnetorheological eeffect, Diamond&Abrasives Engineering, 31, 5, pp. 35-38, (2011)
  • [8] Pan J., Yan Q., Lu J., Et al., Cluster magnetorheological effect plane polishing technology, Journal of Mechanical Engineering, 50, 1, pp. 205-212, (2014)
  • [9] de Groote J.E., Marino A.E., Wilson J.P., Et al., Removal rate model for magnetorheological finishing of glass, Applied Optics, 46, 32, pp. 7927-7941, (2007)
  • [10] Shorey A.B., Jacobs S.D., Kordonski W.I., Et al., Experiments and observations regarding the mechanisms of glass removal in magnetorheological finishing, Applied Optics, 40, 1, pp. 20-33, (2001)
12