An experimental study on the grinding of alumina with a monolayer brazed diamond wheel

被引：0
|
作者：
Chen, Jianyi [1 ]
Huang, Hui [1 ]
Xu, Xipeng [1 ]
机构：
[1] Key Research Lab for Stone Machining, Huaqiao University, Quanzhou, Fujian 362021, China
来源：
International Journal of Advanced Manufacturing Technology | 2009年 / 41卷 / 1-2期
关键词：
A monolayer diamond grinding wheel was fabricated by brazing in vacuum. The wheel was then used to grind alumina at three different grinding speeds. The horizontal and vertical grinding forces; and the grinding temperatures were measured during grinding. SEM observations were made for the ground workpiece surfaces. The influences of the peripheral wheel speed on the grinding forces; specific grinding energy and grinding temperatures were analyzed under different combinations of depth of cut and workpiece velocity. The dependence of the average grinding force per grain and specific grinding energy on the maximum undeformed chip thickness was discussed respectively. It was found that an increase in the peripheral wheel speed reduced grinding force; but increased force ratio; specific grinding energy; and grinding temperature. © 2008 Springer-Verlag London Limited;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：16 / 23
相关论文
共 50 条
  • [1] An experimental study on the grinding of alumina with a monolayer brazed diamond wheel
    Jianyi Chen
    Hui Huang
    Xipeng Xu
    The International Journal of Advanced Manufacturing Technology, 2009, 41 : 16 - 23
  • [2] An experimental study on the grinding of alumina with a monolayer brazed diamond wheel
    Chen, Jianyi
    Huang, Hui
    Xu, Xipeng
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009, 41 (1-2): : 16 - 23
  • [3] Microstructure and performance of monolayer brazed grinding wheel with polycrystalline diamond grains
    Meng, Pu
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 83 (1-4): : 441 - 447
  • [4] Microstructure and performance of monolayer brazed grinding wheel with polycrystalline diamond grains
    Pu Meng
    The International Journal of Advanced Manufacturing Technology, 2016, 83 : 441 - 447
  • [5] Study on grinding of SiCp/Al composites by micro-textured monolayer brazed diamond wheel
    Li, Kai-jiang
    Liao, Yan-ling
    Zhou, Yu-mei
    Zhang, Feng-lin
    Liu, Jiang-wen
    Wu, Shi-xiong
    Tang, Hong-qun
    Pan, Xiao-yi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 126 (9-10): : 4607 - 4615
  • [6] Study on grinding of SiCp/Al composites by micro-textured monolayer brazed diamond wheel
    Kai-jiang Li
    Yan-ling Liao
    Yu-mei Zhou
    Feng-lin Zhang
    Jiang-wen Liu
    Shi-xiong Wu
    Hong-qun Tang
    Xiao-yi Pan
    The International Journal of Advanced Manufacturing Technology, 2023, 126 : 4607 - 4615
  • [7] Experiment Research on Grinding Of Optical Glass with Indigenously Developed Monolayer Brazed Diamond Grinding Wheel
    Zhang Bei
    Xu Hongjun
    Fu Yucan
    Su Honghua
    FRONTIER IN FUNCTIONAL MANUFACTURING TECHNOLOGIES, 2010, 136 : 279 - 283
  • [8] Dressing of Monolayer Brazed Diamond Wheel for Grinding Li-Ti Ferrite
    Su, Honghua
    Fu, Yucan
    Xu, Jiuhua
    Ding, Wenfeng
    Xu, Hongjun
    ADVANCES IN ABRASIVE TECHNOLOGY XIII, 2010, 126-128 : 995 - 1000
  • [9] Grinding of brittle materials with brazed diamond grinding wheel
    Zhang, Bei
    Fu, Yucan
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 67 (9-12): : 2845 - 2852
  • [10] Grinding of brittle materials with brazed diamond grinding wheel
    Bei Zhang
    Yucan Fu
    The International Journal of Advanced Manufacturing Technology, 2013, 67 : 2845 - 2852
12345