Research on distortion ananlysis theory of thin-walled box girder

被引：0

作者：

机构：

[1] School of Civil Engineering, Southwest Jiaotong University, Chengdu

来源：

Xu, X. (xu3xun3@126.com) | 1600年 / Tsinghua University卷 / 30期

关键词：

Distortion; Distortion center; Energy variational principle; Shear deformation; Thin-walled box girder;

D O I：

10.6052/j.issn.1000-4750.2012.07.0554

中图分类号：

学科分类号：

摘要：

Comparison and analysis are performed for two typical theories with distortion angle and distortion deflection as displacement parameters. Their results are proved to be identical. The conversion between distortion deflection and distortion angle is established by use of the displacement coordination of cross-section frame, and the conversion functions for the governing differential equations of both theories are derived. Based on the generalized coordinate principle, an explicit definition is given for the distortion centre and displacement modes are determined, and then an analytical theory is presented using energy variational principle, which sufficiently takes account of shear deformation. The formats of initial parameters are deduced to solve the presented differential equations. The influence of shear deformation is investigated and the results show that shear deformation affect insignificantly the distortion warping stress and transverse bending stress.

引用

页码：192 / 201

页数：9

共 18 条

[1]

Bao Y., Huang W., Analysis and comparision of restrained torsion theories foe rectangular box-shaped beam, Engineering Mechanics, 14, 3, pp. 132-137, (1997)

[2]

Zhang Y., Lin L., A method considering shear lag effect for flexural-torsional analysis of skewly supported continuous box girder, Engineering Mechanics, 29, 2, pp. 94-100, (2012)

[3]

Xu X., Research of spatial effects of concrete box girder structure with long span, (2009)

[4]

Steinle A., Torsion und Profilverformung beim einzelligen kastentraeger, Beton und Stahlhetonbau, 65, 9, pp. 215-222, (1970)

[5]

Zeng Q., A plate girder-frame method for the analysis of thin-walled box girders, Journal of the China Railway Society, 3, 2, pp. 92-104, (1981)

[6]

Zhou L., Distortion calculation of single-cell rectangular box girder, Bridge Construction, 4, pp. 1-45, (1980)

[7]

Vlasov V.Z., Thin-walled Elastic Beams, (1961)

[8]

Zhang S., Liu J., Distortion stress of single-cell trapezoidal box girder, Journal of Beijing University of Technology, 13, pp. 79-92, (1987)

[9]

Wright R.N., Abdel-Samad S.R., BEF analogy for analysis of box girders, Journal of the Structural Division, ASCE, 94, 7, pp. 1719-1743, (1968)

[10]

Mei J., Distortion calculation of single-cell trapezoidal box girder, Journal of Central South Highway Engineering, 2, pp. 8-23, (1983)

← 1 2 →