Microwave heating temperature rise characteristics of composite minerals under the circumferential stirring model

被引：0
|
作者：
Long S. [1 ]
Hong Y. [1 ,2 ]
Sun X. [1 ]
Yang F. [1 ]
Guo J. [1 ]
Nie W. [2 ]
机构：
[1] School of Environmental and Safety Engineering, Fuzhou University, Fujian, Fuzhou
[2] Quanzhou Institute of Equipment Manufacturing, Haixi Research Instite, Chinese Academy of Sciences, Fujian, Quanzhou
来源：
Zhongguo Kuangye Daxue Xuebao/Journal of China University of Mining and Technology | 2024年 / 53卷 / 02期
关键词：
composite minerals; heating mechanism; microwave rock breaking; numerical simulation;
D O I：
10.13247/j.cnki.jcumt.20230251
中图分类号：
学科分类号：
摘要：
To investigate the microwave heating mechanism of composite minerals, a circumferential stirring model based on the Arbitrary Lagrangian-Eulerian (ALE) method was established by COMSOL Multiphysics software. This model aims to study the temperature rise characteristics of mineral models with different component structures and proportions. The results show that the heating efficiency and uniformity of the mineral are higher in the stirred heating model with a 5 cm copper disc rotating at (π/3) rad/s compared to the non-stirred heating model; The different component structures of the composite mineral result in different electromagnetic wave distributions, which induces the microwave heating efficiency of the py-rite-enclosed calcite model is lower than the calcite-enclosed pyrite model; In the calcite-en-closed pyrite model, the variation of pyrite thickness changes the phase of electromagnetic wave, leading to the displacement of hot and cold spots in the mineral. Furthermore, when comparing the pyrite thicker and thinner than the penetration depth, there is a significant disparity in the incident electromagnetic wave intensity, resulting in noticeable differences in electric field strength; At the same component proportion, the overall electric field of heterogeneous minerals is lower and more stable, and the electric field intensity between components is closer than in composite homogeneous minerals; With the proportion of pyrite increases, the temperature variation of heterogeneous minerals after 30 s microwave heating can be divided into three regions: small peak region (0-10%), large peak region (10% - 50%), and stable region (50% - 75%), and the temperature differences between components gradually decrease. © 2024 China University of Mining and Technology. All rights reserved.
引用
收藏
页码：318 / 333
页数：15
相关论文
共 37 条
  • [1] FU Ensan, BAI Runcai, LIU Guangwei, Et al., Analysis on characteristics and evolution trend of coal mine accidents in our country during "13th five-year" plan period, China Safety Science Journal, 32, 12, pp. 88-94, (2022)
  • [2] LI H, LIU W C, LU J X, Et al., Effect of microwave-assisted acidification on the microstructure of coal: XRD, 1H-NMR, and SEM studies [J], International Journal of Mining Science and Technology, 33, 7, pp. 919-926, (2023)
  • [3] QIN X J, CAI J C, WANG G., Pore-scale modeling of pore structure properties and wettability effect on permeability of low-rank coal [J], International Journal of Mining Science and Technology, 33, 5, pp. 573-584, (2023)
  • [4] LIN Baiquan, ZHANG Xiangliang, Mechanism and research progress of plasma induced cracking and en-hancement in low permeability and hard to extract coal seams, Journal of China University of Mining & Technology, 52, 6, pp. 1041-1057, (2023)
  • [5] WANG Gang, CHEN Hao, CHEN Xuechang, Et al., Study on seepage characteristics of coal fissures with variable apertures based on CT 3D reconstruction[J], Journal of China University of Mining &Technology, 53, 1, pp. 59-67, (2024)
  • [6] YANG Zhaozhong, ZHU Jingyi, LI Xiaogang, Et al., Progress in researches on microwave irradiation on rocks for treatment and exploitation, Science Technology and Engineering, 19, 5, pp. 1-7, (2019)
  • [7] LIU C P, XU Y S, HUA Y X., Application of microwave radiation to extractive metallurgy, Journal of Materials Science & Technology, 2, 6, pp. 121-124, (1990)
  • [8] CHEN T, DUTRIZAC J, HAQUE K, Et al., The relative transparency of minerals to microwave radia-tion, Canadian Metallurgical Quarterly, 23, 3, pp. 349-351, (1984)
  • [9] KINGMAN S W, VORSTER W, ROWSON N., The influence of mineralogy on microwave assisted grinding, Minerals Engineering, 13, 3, pp. 313-327, (2000)
  • [10] JONES D A, KINGMAN S W, WHITTLES D N, Et al., Understanding microwave assisted breakage [J], Minerals Engineering, 18, 7, pp. 659-669, (2005)
1234