A systematic approach for determination of optimal conditions for Lo-Solids™ kraft pulping of Eucalyptus nitens

被引：0
|
作者：
Dang, Vinh Q. [1 ]
Nguyen, Kien L. [1 ]
机构：
[1] Australian Pulp and Paper Institute, Monash University, Wellington Road, Vic. 3800, Australia
来源：
Chemical Engineering Journal | 2007年 / 133卷 / 1-3期
关键词：
Kraft pulping of thin chips of Eucalyptus nitens was performed in laboratory flow-through reactors under isothermal condition. The effects of process variables on the dissolutions of the lignocellulosic components; i.e; lignin; pentosans and cellulose; of the chips were studied. It was found that at a target kappa number; higher pulp yields could be obtained by pulping at a temperature below 150 °C and with an effective alkali concentration below 0.5 M. The effects of all process conditions were combined using the Nuclei Growth kinetic models. © 2007 Elsevier B.V. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：97 / 103
相关论文
共 45 条
  • [1] A systematic approach for determination of optimal conditions for Lo-Solids™ kraft pulping of Eucalyptus nitens
    Dang, Vinh Q.
    Nguyen, Kien L.
    CHEMICAL ENGINEERING JOURNAL, 2007, 133 (1-3) : 97 - 103
  • [2] Effect of alkali profiling in Lo-solids® pulping of Eucalyptus urophylla
    Jiang, JE
    EMERGING TECHNOLOGIES OF PULPING & PAPERMAKING OF FAST-GROWING WOOD, 1998, : 171 - 178
  • [3] Lo-solids pulping: principles and applications
    Marcoccia, Bruno S.
    Laakso, Richard
    McClain, Geoffrey
    TAPPI Journal, 1996, 79 (06):
  • [4] Factors responsible for yield gains from Lo-Solids® pulping of Eucalyptus species
    Jiang, JE
    Allison, RW
    LLoyd, JA
    APPITA JOURNAL, 2001, 54 (03): : 304 - 309
  • [5] Lo-Solids(TM) pulping: Principles and applications
    Marcoccia, BS
    Laakso, R
    McClain, G
    TAPPI JOURNAL, 1996, 79 (06): : 179 - 188
  • [6] ASA and kraft pulping of eucalyptus globulus and eucalyptus nitens
    Pereira, M.
    Kordsachia, O.
    Patt, R.
    Professional Papermaking, 2007, 4 (02): : 44 - 49
  • [7] Lo-Solids(TM) pulping technology is spreading
    Ouellet, J
    PULP & PAPER-CANADA, 1996, 97 (03) : 40 - 40
  • [8] The theoretical background to Lo-Solids(TM) Pulping
    Marcoccia, BS
    82ND ANNUAL MEETING, TECHNICAL SECTION, CANADIAN PULP AND PAPER ASSOCIATION - CREATING AN ENVIRONMNET FOR THE FUTURE, PREPRINTS B, 1996, : B265 - B274
  • [9] Determination of fiber charge components of Lo-Solids unbleached kraft pulps
    Bhardwaj, NK
    Duong, TD
    Hoang, V
    Nguyen, KL
    JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2004, 274 (02) : 543 - 549
  • [10] Mixtures of Eucalyptus grandis x Eucalyptus urophylla and Pinus taeda wood chips for kraft pulp production by Lo-Solids® process
    Monnerat Carvalho Bassa, Ana Gabriela
    da Silva Junior, Francides Gomes
    Sacon, Vera M.
    SCIENTIA FORESTALIS, 2007, 35 (75): : 19 - 29
12345