Experimental study on two-phase flow characteristics in pebble-bed porous media channel

被引：0

作者：

Li, Hua ^{[1
]}

Chen, Ping ^{[1
]}

Qiu, Suizheng ^{[2
]}

Su, Guanghui ^{[2
]}

Tian, Wenxi ^{[2
]}

Li, Yun ^{[1
]}

Su, Min ^{[1
]}

机构：

[1] Science Technology on Reactor System Design Technology Laboratory, Nuclear Power Institute of China, Chengdu

[2] Department of Nuclear Science and Technology, Xi'an Jiaotong University, Xi'an

来源：

Hedongli Gongcheng/Nuclear Power Engineering | 2014年 / 35卷 / 06期

关键词：

Experimental research; Porous media; Resistance characteristics; Two-phase flow characteristics;

D O I：

10.13832/j.jnpe.2014.06.0021

中图分类号：

学科分类号：

摘要：

The experimental apparatus was designed and made up of isotropous particles (pebble) in porous media. All the pebbles were unordered accumulation. The experimental research on the flow characteristics of nitrogen-water two-phase flow in channel was conducted. The porous media channels were consisted of the polymethyl methacrylate (PMMA) circular pipe which diameters are 60, 70 mm and stainless steel ball which diameters are 2, 4, 6, and 8 mm. The experimental results show that when the liquid flow is constant, the pressure drop between the inlet and outlet of the test section will lower with the increasing of the inner diameter of the test pipe, but higher by decreasing the diameter of ball or accelerating the nitrogen flow. When the inner diameter of the test pipe is invariable, increasing the diameter of ball can decrease the pressure drop between inlet and outlet of the test section. The expressions of pressure drop were obtained under this experimental condition by fitting. ©, 2014, Yuan Zi Neng Chuban She. All right reserved.

引用

页码：21 / 25

页数：4

共 8 条

[1]

Jamialahmadi M., Muller-Steinhagen H., Izadpanah M.R., Pressure drop, gas hold-up and heat transfer during single and two-phase flow through porous media, International Journal of Heat and Fluid Flow, 26, pp. 156-172, (2005)

[2]

Benkrid K., Rode S., Midoux N., Prediction of pressure drop and liquid saturation in trickle-bed reactors operated in high interaction regimes, Chemical Engineering Science, 52, 21, pp. 4021-4032, (1997)

[3]

Hassan Y.A., Kang C., E E., Dominguezontiveros. pressure drop in packed bed reactor under high reynolds number, Nuclear Engineering and Design, 180, 2, pp. 159-173, (2012)

[4]

Fand R.M., Thinakaran R., The influence of the wall on flow through pipes packed with spheres, Journal of Fluids Engineering-Transactions of the ASME, 112, 1, pp. 84-88, (1990)

[5]

Yuji Sato T.H., Takahashi F., Toda M., Pressure loss and liquid holdup in packed bed reactor with cocurrent gas-liquid down flow, Journal of Chemical Engineering of Japan, 6, pp. 147-152, (1973)

[6]

Zou R.P., Yu A.B., The packing of spheres in a cylindrical container - The thickness effect, Chemical Engineering Science, 50, 9, pp. 1504-1507, (1995)

[7]

Sorokin V.V., Calculation of Two-Phase Adiabatic Flow in a Pebble Bed, High Temperature, 45, 2, pp. 227-232, (2007)

[8]

Khan A., Yelamanchili Y.B.G., Prediction of Two-Phase Frictional Pressure Drop for the Concurrent Gas and Newtonian Liquids Upflow through Packed Beds, Chem. Eng. Technol, 25, 1, pp. 51-55, (2002)

← 1 →