Effect of Amine Type on Lignin Modification to Evaluate Its Reactivity in Polyol Construction for Non-Isocyanate Polyurethanes (NIPU)

被引：0
作者：
Najafi S.K. [1 ]
Najafi F. [2 ]
Pizzi A. [3 ]
Khorshidi F.H. [1 ]
Behrooz R. [1 ]
机构：
[1] Department of Wood Science and Technology, Faculty of Natural Resources, Tarbiat Modares University, Tehran
[2] Department of Resin and Additives, Institute for Color Science and Technology, Tehran
[3] LERMAB, University of Lorraine, Blvd des Aiguillettes, Nancy
来源：
Journal of Renewable Materials | 2023年 / 11卷 / 05期
关键词：
diethylenetriamine; ethylenediamine; lignin; NIPU; Polyol; polyurethanes; propylene carbonate;
D O I：
10.32604/jrm.2023.027835
中图分类号：
学科分类号：
摘要：
Polyols are groups of organic compounds which contain carbon and are randomly linked to other atoms, espe-cially carbon-carbon and carbon-hydrogen. These compounds are mainly used as reactants to make other poly-mers. Among biopolymers, lignin is regarded as the base of a new polymer in polyol construction. The present study aimed to investigate the effects of amine type (diethylenetriamine and ethylenediamine) on the modification of lignin-based polyols, so as to provide an alternative to petroleum polyols and, in turn, increase functional groups and reduce their harm to humans’ health and the environment. To this aim, first, lignin was extracted from raw liquor. Next, the extracted lignin was reacted with diethylenetriamine (DETA) and ethylenediamine (EDA). Finally, the Mannich method was used for the reaction between amine lignin and propylene carbonate. The results of the Fourier Transform Infrared (FTIR) spectroscopy analysis showed that modification with DETA led to more structural change in lignin and peak 1100 indicates the presence of C–O bond related to urethane bonds in modified lignin. Moreover, adding propylene carbonate to aminated lignin did not result in much change in the results of the FTIR analysis. Additionally, urethane bonds can be seen in the results of GPC at 400°C–500°C. Furthermore, a slight decrease in thermal stability was observed in lignin modified with amine and propylene carbonate, compared to the raw lignin sample. © 2023, Tech Science Press. All rights reserved.
引用
收藏
页码：2171 / 2189
页数：18
相关论文
共 66 条
  • [41] Hu L., Pan H., Zhou Y., Zhang M., Methods to improve lignin reactivity as a phenol substitute and as a replacement for other phenolic compounds: A brief review, BioResources, 6, pp. 3515-3525, (2011)
  • [42] Mohamad Ebrahim M. N., Mohamad Yosof N. N., Hashim A., Comparison studies on soda lignin and soda anthraquinone lignin, The Malaysian Journal of Analytical Sciences, 11, 1, pp. 206-212, (2007)
  • [43] El Mansouri N. E., Yuan Q., Huang F., Study of chemical modification of alkaline lignin by the glyoxalation reaction, Bioresources, 6, 4, pp. 4523-4536, (2011)
  • [44] Gosselink R., Abacherli A., Semke H., Malherbe R., Kauper P., Et al., Analytical protocols for characterisation sulphur-free lignin, Industrial Crops and Products, 19, 3, pp. 271-281, (2004)
  • [45] Brodin I., Chemical properties and thermal behaviour of kraft lignins. KTH, school of chemical science and engineering (CHE), Fibre and Polymer Technology, 17, pp. 1654-1081, (2009)
  • [46] Bayerbach R., Nguyen V., Schurr U., Meier D., Characterisation of the water insoluble fraction from fast pyrolysis liquids (pyrolytic lignin): Part III. Molar mass characteristics by SEC, MALDI-TOF-MS, LDI-TOF-MS and Py-FIMS, Journal of Analytical Applied Pyrolysis, 77, pp. 95-101, (2006)
  • [47] Rajendran G. P., Mahadevan V., Srinivasan M., Synthesis and properties of polyester based polyurethanes, European Polymer Journal, 18, 11, pp. 953-956, (1982)
  • [48] Murayama T., Nakano Y., Murata S., Polyester, (2005)
  • [49] Allauddin S., Jena K. K., Mishara A. K., Radhika K. R., Narayan, Et al., Synthesis and characterization of benzaldehyde modified acetoacetylated polyesters for polyurethane/urea coatings, Progress in Organic Coatings, 75, 1–2, pp. 131-138, (2012)
  • [50] Cook W. H., Glutarate-containing polyester polyols. methods of preparation and polyurethane compositions derived therefrom, 4, (1975)
1234567