Kinematic solution of 3-PSS parallel mechanism and its application in parallel CMM

被引:5
作者
机构
[1] School of Instrument Science and Opto-Electronics Engineering, Hefei University of Technology
来源
Li, S.-Y. (lishimin1988@163.com) | 1600年 / Chinese Academy of Sciences卷 / 20期
关键词
Coordinate Measurement Machine (CMM); Error averaging effort; Measurement model; Parallel mechanism;
D O I
10.3788/OPE.20122004.0782
中图分类号
学科分类号
摘要
A new style coordinate measuring system based on 3-PSS parallel mechanism was proposed to overcome the drawbacks and weaknesses of traditional Coordinate Measurement Machines (CMMs) and articulated arm CMMs and to realize 3D measurement with only one linear grating and one precision guide. A measurement model, a measuring error model as well as the error averaging effort of the parallel mechanism were investigated. Firstly, a 6-bar measurement model was achieved based on the theory of parallel kinematic mechanism. Then, the influence of bar length error and reading error from the liner grating were analyzed in detail and the hypostasis why parallel structure posses error averaging effort was revealed mathematically. Finally, the prototype CMM was introduced to its design, manufacturing and assemble and the experiment result was provided too. Results indicate that the measuring errors before compensation and instrument calibration in three dimensions are about 0.029 mm in x direction, 0.045 mm in y direction and 0.058 mm in z direction. Obtained results can provide the direction for the design of new CMM protypes.
引用
收藏
页码:782 / 788
页数:6
相关论文
共 12 条
  • [1] Zhu J.G., Guo L., Liu C.J., Et al., Measurement system of flexible electronic checking fixture on robot, Opt. Precision Eng., 19, 8, pp. 1787-1792, (2011)
  • [2] Liu D.W., Wang L.P., Guan L.W., Accuracy analysis and calibration of a special 3-DOF parallel mechanism, Journal of Mechanical Engineering, 46, 9, pp. 46-51, (2010)
  • [3] Mei F., Zhao X.H., Accuracy analysis of 3-DOF parallel manipulator, Journal of Tianjin University of Technology, 26, 4, pp. 15-17, (2010)
  • [4] Guan X.F., Guo C., Hu M., PLC control to 3-PTT parallel machine tool with slider, Machinery Design & Manufacture, 5, 5, pp. 200-201, (2009)
  • [5] Wolfgang Z., Neustadt C., Device for the translatory positioning of a platform, (2005)
  • [6] Zhu X.R., Shen H.P., Yu Z.Q., Et al., Study and development of a coordinate measuring with 3-DOF parallel link, Manufacturing Technology and Machine Tool, 1, pp. 67-71, (2010)
  • [7] Shen H.P., Zhu X.R., Ma L.Z., Et al., Structural conceptual optimization and kinematics of a 3-dof novel parallel mechanism used for virtual axes coordinate measure machine, Reconfigurable Mechanisms and Robots, pp. 118-122, (2009)
  • [8] Wei Z.Z., Zhang B., Zhang G.J., Rapid hand-eye calibration of dual robot system, Opt. Precision Eng., 19, 8, pp. 1895-1902, (2011)
  • [9] Liu D.J., Che R.S., Luo X.C., Et al., New type of CMM-Parallel mechanism coordinate measuring machine, Opt. Precision Eng., 8, 5, pp. 497-502, (2000)
  • [10] Takaaki O., Accuracy improvement of parallel kinematic machine-error compensation system for joints, links and machine frame, 6th International Conference on Mechatronics Technology (ICMT2002), pp. 433-438, (2002)