Off-Line Programming of a Robot for Laser Re-Manufacturing

被引：0

作者：

Jin, Xiaoshu ^{[1
]}

Yang, Xichen ^{[1
]}

机构：

[1] School of Machinery and Electron, Institute of Laser Technology, Tianjin Polytechnic University, Tianjin

来源：

Tsinghua Science and Technology | 2009年 / 14卷 / SUPPL. 1期

关键词：

direct slicing; laser re-manufacturing; off-line programming; robot;

D O I：

10.1016/S1007-0214(09)70090-2

中图分类号：

学科分类号：

摘要：

Off-line programming provides an essential link for CAD/CAM. This paper introduced the principle of developing off-line programming system for laser re-manufacturing. Task and information flow of off-line programming for laser re-manufacturing robot was analyzed and the software structure of off-line programming based on commercial CAD software was constructed. The off-line programming system developed in this study includes 3-D solid model design, direct slicing for obtaining path data, graphical simulation of the robot and its workcell, kinematic model of the robot, motion planning, and creation of the control program for manufacturing process. The CAD software was used to design models of robot, workpiece, coaxial nozzle, and workspace. Through the application programming interface provided by the CAD software, the VC++ and ATL were chosen to develop such modules as direct slicing for obtaining path data, path planning, process specification, and control program automatic generation. The FANUC Roboguide software was used to realize graphical simulation. By direct slicing, the position and orientation data of robot end-effector was determined. The results show that the proposed system can be applied in laser re-manufacturing robot for manufacturing operations. © 2009 Tsinghua University Press.

引用

页码：186 / 191

页数：5

共 11 条

[1]

Yang X., Li H., Liu Y., Et al., Laser re-manufacturing technology and its industrial application, Surface Engineer of China, 61, 4, pp. 43-46, (2003)

[2]

Jeng J.Y., Peng S.C., Chou C.J., Metal rapid prototype fabrication using selective laser cladding technology, The International Journal of Advanced Manufacturing Technology, 16, pp. 681-687, (2000)

[3]

Zhao D., Xiong Y., Research on robot off-line programming system, Robot, 7, pp. 316-320, (1997)

[4]

Mitsi S., Bouzakis K.D., Mansour G., Et al., Off-line programming of an industrial robot for manufacturing, The International Journal of Advanced Manufacturing Technology, 26, pp. 262-267, (2005)

[5]

Swider J., Foit K., Wszolek G., Et al., The off-line programming and simulation software for the Mitsubishi Movemaster RV-M1 robot, Journal of Achievements in Materials and Manufacturing Engineering, 20, 2, pp. 499-502, (2007)

[6]

Jose Mauricio S.d.M., Carlos Augusto G.d.S., Fabio A.A., An off-line robot programming system including workcell and robot calibration, ABCM Symposium Series in Mechatronics, 1, pp. 134-143, (2004)

[7]

Chen J., Wang Y., Zuo T., Development of six-axis robot off-line programming in laser processing, Chinese Journal of Lasers, 30, 3, pp. 279-281, (2003)

[8]

Tang X., Paul D., 3D-visualized off-line programming and simulation system for industrial robots, Transactions of the China Welding Institution, 26, 2, pp. 64-68, (2005)

[9]

Jin X., Yang X., Direct slicing of 3D CAD model in laser direct manufacturing and re-manufacturing, Journal of Computer-Aided Design & Computer Graphics, 19, 6, pp. 757-763, (2007)

[10]

Starly B., Lau A., Sun W., Et al., Direct slicing of STEP-based NURBS models for layered manufacturing, Computer-Aided Design, 37, 4, pp. 387-397, (2005)

← 1 2 →