System level design of microfluidics

被引：0

作者：

Yuan, Wei-Zheng ^{[1
,2
]}

Jiao, Wen-Long ^{[1
,2
]}

Chang, Hong-Long ^{[1
,2
]}

机构：

[1] Shaanxi Province Key Laboratory of Micro/Nano Electro Mechanical Systems, Northwestern Polytechnical University

[2] Key Laboratory of Micro/Nano Systems for Aerospace of the Ministry of Education, Northwestern Polytechnical University

来源：

Guangxue Jingmi Gongcheng/Optics and Precision Engineering | 2013年 / 21卷 / 12期

关键词：

Microfluidics; Modeling; Simulation; System level design;

D O I：

10.3788/OPE.20132112.3141

中图分类号：

学科分类号：

摘要：

It is important to design microfluidic technologies for improving the efficiency of microfluidics and reducing the costs of research and development. However, system level design, modeling and simulation are significant methods for rapid design, optimization, and verification of the microfluidics. This paper introduces the principles and methods of microfluidic design, firstly. Then, it focuses on two main system level design methods, nodal analysis method and equivalent circuit method. After a brief discussion of microfluidic design technology, it introduces the modeling and simulation processes of the two methods, and overviews their research status and development trends in the last ten years at home and abroad. Finally, it summarizes merits and demerits of the two methods and discusses their development prospects. It points out that the system level design and modeling will be great superiority for design a microfluidic system with large-scale, complexity and multi-function.

引用

页码：3141 / 3151

页数：10

共 44 条

[1] Whitesides G.M., The origins and the future of microfluidics, Nature, 442, 7101, pp. 368-373, (2006)
[2] Liu C., Liang Y., Li J.M., Et al., Design of collision protection system of handling robot for microfluidic chip, Opt. Precision Eng., 17, 1, pp. 138-144, (2009)
[3] Liu X., Gao H.M., Li T., Et al., Digital microfluidic chip by electrostatic manipulation in low voltage, Opt. Precision Eng., 19, 1, pp. 97-102, (2011)
[4] Xu Z., Wang J.Z., Yang D., Et al., Effect of assistant solvent on in-mold bonding of PMMA microfluidic chips, Opt. Precision Eng., 20, 2, pp. 321-328, (2012)
[5] Lin B.C., Qin J.H., Graphical Introduction of Microfluidic Lab on a Chip, (2008)
[6] White J., CAD challenges in bioMEMS design, Proceedings of the 41st Annual Design Automation Conference, pp. 629-632, (2004)
[7] White J., Developing design tools for biological and biomedical applications of micro- and nano-technology, Proceedings of the 3rd IEEE/ACM/IFIP International Conference on Hardware/Software Codesign and System Synthesis, pp. 196-200, (2005)
[8] Senturia S.D., CAD challenges for microsensors, microactuators, and microsystems, Proceedings of the IEEE, 86, 8, pp. 1611-1626, (1998)
[9] Chakrabarty K., Zeng J., Design automation for microfluidics-based biochips, ACM Journal on Emerging Technologies in Computing Systems, 1, 3, pp. 186-223, (2005)
[10] Magargle R., Modeling and simulation for robust design of microfluidic lab-on-a-chip systems, (2007)

← 1 2 3 4 5 →