共 50 条
- [11] Phase selector based on fault component current for double-circuit transmission lines on single tower Dianli Xitong Zidonghue, 2007, 21 (53-57):
- [12] Development of a novel dynamic physical model for double-circuit transmission lines on the same tower Dianli Xitong Zidonghua/Automation of Electric Power Systems, 2010, 34 (21): : 61 - 64
- [13] Measurement and calculation of power frequency phase parameters of 1 000 kV AC double-circuit transmission lines on the same tower Chen, Weijiang, 1600, Chinese Society for Electrical Engineering (34):
- [14] Research on secondary-arc currents and induced voltages for 750 kV compact double-circuit transmission lines on the same tower with the same phase sequence in the same tower window Dianwang Jishu/Power System Technology, 2011, 35 (01): : 84 - 90
- [15] Research on Tripping and Reclosing Strategy and Quasi-Three-Phase Operation of Double Circuit Lines on the Same Tower 2017 IEEE INNOVATIVE SMART GRID TECHNOLOGIES - ASIA (ISGT-ASIA), 2017, : 122 - 127
- [16] Research on Induced voltage and Current in Deenergized Line of Double-Circuit Transmission Lines on the Same Tower 2019 4TH INTERNATIONAL CONFERENCE ON INTELLIGENT GREEN BUILDING AND SMART GRID (IGBSG 2019), 2019, : 264 - 269
- [17] Control Strategy of Grounding Electrode Current for Double-circuit HVDC Transmission Lines on the Same Tower Dianli Xitong Zidonghua/Automation of Electric Power Systems, 2018, 42 (18): : 169 - 176
- [18] A New Scheme of Fault Location for Parallel Double-circuit Transmission Lines 2020 CHINESE AUTOMATION CONGRESS (CAC 2020), 2020, : 1118 - 1122
- [19] Fault identification of double-circuit transmission lines on same tower based on measuring wave impedance Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science), 2019, 53 (12): : 2412 - 2422
- [20] Optimization scheme of grounding distance protection based on substation-area information for double-circuit transmission lines on same tower Liu, Yiqing (cse_liuyq@ujn.edu.cn), 1600, Electric Power Automation Equipment Press (41): : 49 - 56