Tooth contact analysis of spiral bevel gears based on digital real tooth surfaces

被引：7

作者：

机构：

[1] School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai

[2] School of Engineering, Kyoto University, Kyoto

来源：

Wang, Zhonghou | 1600年 / Chinese Mechanical Engineering Society卷 / 50期

关键词：

Composite error; Real tooth flank; Spiral bevel gears; Tooth contact analysis;

D O I：

10.3901/JME.2014.15.001

中图分类号：

学科分类号：

摘要：

By importing imaginary whole conjugated tooth surface as the reference tooth surface, namely the reference tooth surface of gear is consisted of theoretical tooth surface with machining tool setting parameters, and the reference tooth surfaces of pinion use the tooth surfaces conjugating with the reference tooth surfaces of gear. The imaginary tooth surface is instantaneous line contact without transmission error. Through the topological mesh of reference tooth surface contact lines, the digital synthetic error concept is introduced, and the digital real tooth surfaces of spiral bevel gear with tooth profile error and installation error can be built. A tooth contact analysis (TCA) method based on high precision digital real tooth surface of spiral bevel gears puts forward. The feasibility and effectiveness of this method can be verified through the comparison of TCA software analysis results by Gleason corporation and tooth wear test results. ©2014 Journal of Mechanical Engineering

引用

页码：1 / 11

页数：10

共 10 条

[1]

Litvin F.L., Local synthesis and tooth contact analysis of face-milled spiral bevel gears, (1990)

[2]

Simon V., Influence of tooth errors and misalignments on tooth contact in spiral bevel gears , Mechanism and Machine Theory, 43, 2, pp. 1253-1267, (2008)

[3]

Tang J., Lu Y., Zhou C., Error tooth contact analysis of spiral bevel gears transmisson , Chinese Journal of Mechanical Engineering, 44, 7, pp. 16-23, (2008)

[4]

Tang J., Lu Y., Zhou C., Research on improved tooth contact analysis algorithm of spiral bevel gears , Journal of Aerospace Power, 24, 1, pp. 189-195, (2009)

[5]

Wang Y., Zhou Y., Zhou J., Et al., Loaded contact analysis of bevel gear tooth based on tooth manufacture error , Mechanical Science and Technology, 21, 2, pp. 224-227, (2002)

[6]

Zhang J., Fang Z., Wang C., Digital simulation of spiral bevel gears' real tooth surfaces based on non-uniform rational B-spline , Journal of Aerospace Power, 24, 7, pp. 1672-1676, (2009)

[7]

Wang Z., Zhou X., Tetsutaru O., Et al., Surface error measurement of spiral bevel gears using scanning measurement , Chinese Journal of Scientific Instrument, 28, 2, pp. 11-13, (2007)

[8]

Wang Z., Zhao D., Kubo A., Et al., Surface error measurement of spiral bevel gears using scanning measurement , Chinese Journal of Scientific Instrument, 30, 8, pp. 1752-1756, (2009)

[9]

Takeda R., Wang Z., Kubo A., Et al., Performance analysis of hypoid gears by tooth flank form measurement , Gear Technology, 7-8, pp. 26-30, (2002)

[10]

Wang Z., Zhou X., Tooth surface detection and quality control of spiral bevel gears in automotive drive axle , Modern Components, 11, pp. 57-61, (2005)

← 1 →