Thermal degradation kinetics of rigid polyurethane foams blown with water

被引：0
|
作者：
Li, Xiao-Bin [1 ,2 ]
Cao, Hong-Bin [1 ]
Zhang, Yi [1 ]
机构：
[1] Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100080, China
[2] Graduate School, Chinese Academy of Sciences, Beijing 100039, China
来源：
Journal of Applied Polymer Science | 2006年 / 102卷 / 05期
关键词：
The thermal decomposition behavior of rigid polyurethane foams blown with water was studied by dynamic thermogravimetric analysis (TGA) in both nitrogen and air atmosphere at several heating rates ranging from room temperature to 800°C. The kinetic parameters; such as activation energy (E); degradation order (n); and pre-exponential factor (A) were calculated by three single heating rate techniques of Friedman; Chang; and Coats-Redfern; respectively. Compared with the decomposition process in nitrogen; the decomposition of foams in air exhibits two distinct weight loss stages. The decomposition in nitrogen has the same mechanism as the first stage weight loss in air; but the second decomposition stage in air appears to be dominated by the thermo-oxidative degradation. The heating rates have insig nificant effect on the kinetic parameters except that the kinetic parameters at 5°C/min have higher values in nitrogen and lower values in air; indicating different degradation kinetics in nitrogen and air. The kinetic parameters of foam samples blown with different water level in formulation decline firstly and then increase when water level increases from 3.0 to 7.0 pph. According to the prediction for lifetime and half-life time of foams; water-blown rigid foams have excellent thermostability; when used as insulation materials below 100°C. © 2006 Wiley Periodicals; Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：4149 / 4156
相关论文
共 50 条
  • [21] Properties of rigid polyurethane foams blown by HCFC141B and distilled water
    Jung, HC
    Ryu, SC
    Kim, WN
    Lee, YB
    Choe, KH
    Kim, SB
    JOURNAL OF APPLIED POLYMER SCIENCE, 2001, 81 (02) : 486 - 493
  • [22] Properties of rigid polyurethane foams blown by HFC-365mfc and distilled water
    Kim, Youn Hee
    Lee, Jae Won
    Choi, Seok Jin
    Han, Mi Sun
    Kim, Ji Mun
    Vim, Sang Bum
    Kim, Woo Nyon
    JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, 2007, 13 (07) : 1076 - 1082
  • [23] The influence of expandable polystyrene fillers on properties of water-blown rigid polyurethane foams
    Malewska, Elzbieta
    Trzyna, Marcin
    Sabanowska, Anna
    Prociak, Aleksander
    Koniorczyk, Piotr
    POLIMERY, 2011, 56 (11-12) : 865 - 868
  • [24] Water blown free rise polyurethane foams
    Niyogi, D
    Kumar, R
    Gandhi, KS
    POLYMER ENGINEERING AND SCIENCE, 1999, 39 (01): : 199 - 209
  • [25] Analysis of thermal properties and heat transfer mechanisms for polyurethane foams blown with water
    Choi, Sung Woong
    Jung, Jae Min
    Yoo, Hyeong Min
    Kim, Sung Ha
    Lee, Woo Il
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2018, 132 (02) : 1253 - 1262
  • [26] Analysis of thermal properties and heat transfer mechanisms for polyurethane foams blown with water
    Sung Woong Choi
    Jae Min Jung
    Hyeong Min Yoo
    Sung Ha Kim
    Woo Il Lee
    Journal of Thermal Analysis and Calorimetry, 2018, 132 : 1253 - 1262
  • [27] Cryogenic thermal insulating and mechanical properties of rigid polyurethane foams blown with hydrofluoroolefin: Effect of perfluoroalkane
    Kim, Tae Seok
    Lee, Yeongbeom
    Hwang, Chul Hyun
    Song, Kwang Ho
    Kim, Woo Nyon
    JOURNAL OF CELLULAR PLASTICS, 2022, 58 (03) : 467 - 483
  • [28] Water-blown rigid and flexible polyurethane foams containing epoxidized soybean oil triglycerides
    Tu, Yuan-Chan
    Suppes, Galen J.
    Hsieh, Fu-Hung
    Journal of Applied Polymer Science, 2008, 109 (01): : 537 - 544
  • [29] Water-blown rigid and flexible polyurethane foams containing epoxidized soybean oil triglycerides
    Tu, Yuan-Chan
    Suppes, Galen J.
    Hsieh, Fu-Hung
    JOURNAL OF APPLIED POLYMER SCIENCE, 2008, 109 (01) : 537 - 544
  • [30] Long-term thermal conductivity of cyclopentane-water blown rigid polyurethane foams reinforced with different types of fillers
    Santiago-Calvo, Mercedes
    Tirado-Mediavilla, Josias
    Luis Ruiz-Herrero, Jose
    Villafane, Fernando
    Angel Rodriguez-Perez, Miguel
    POLYMER INTERNATIONAL, 2019, 68 (10) : 1826 - 1835
12345