Load identification of offshore platform for fatigue life estimation

被引：0

作者：

机构：

[1] Ramboll Oil and Gas, Willemoesgade 2, Esbjerg

[2] Department of Civil Engineering, Aalborg University, Sohngaardsholsvej 57, Aalborg

来源：

Perišić, Nevena (nepe@ramboll.com) | 1600年 / SAGE Publications Ltd卷 / 05期

关键词：

Kalman filter; Load identification; Offshore oil platforms; State-space model; Structural monitoring systems;

D O I：

10.1007/978-3-319-04570-2__11

中图分类号：

学科分类号：

摘要：

The lifetime of an offshore platform is typically governed by accumulated fatigue damage. Thus, the load time history is an essential parameter for prediction of the lifetime of the structure and its components. Consequently, monitoring of structural loads is of special importance in relation to re-assessment of offshore platforms. Structural monitoring systems (SMS’s) on offshore structures typically consist of a set of sensors such as strain gauges, accelerometers, wave radars and GPS’s, however direct measuring of the actual loading is usually not feasible. One approach is to measure the loads indirectly by monitoring of the available dynamic responses of the structure. This work investigates the possibility for using an economically beneficial, model-based load estimation algorithm for indirect measuring of the loading forces acting on the offshore structure. The algorithm is based on the reduced order model of the structure and the discrete Kalman filter which recursively estimates unknown states of the system in real time. As a test-case, the algorithm is designed to estimate the equivalent total loading forces of the structure. The loads are estimated from noised displacement measurements of a single location on the topside of the offshore structure. The method is validated using simulated data for two wave loading cases: regular and irregular wave loadings. © The Society for Experimental Mechanics, Inc. 2014.

引用

页码：99 / 109

页数：10

共 29 条

[21]

Bogler P.L., Tracking a maneuvering target using input estimation, IEEE Trans Aero Electron Syst AES, 23, pp. 298-310, (1987)

[22]

Hou M., Xian S., Comments on “tracking a maneuvering target using input estimation”, IEEE Trans Aero Electron Syst, 25, 2, pp. 280-281, (1989)

[23]

Tuana P.C., Jia C.C., Fonga L.W., Huanga W.T., An input estimation approach to on-line two-dimensional inverse heat conduction problems, Numer Heat Tran B Fund Int J Comput Meth, 29, 3, pp. 345-363, (1996)

[24]

Hwang J.S., Kareem A., Kim W.J., Estimation of modal loads using structural response, J Sound Vib, 326, pp. 522-539, (2009)

[25]

Lourens E., Reynders E., De Roeck G., Degrande G., Lombaert G., An augmented Kalman filter for force identification in structural dynamics, Mech Syst Signal Process, 27, pp. 446-460, (2012)

[26]

Perisic N., Pedersen B.J., Kirkegaard P.H., Gearbox fatigue load estimation for condition monitoring of wind turbines, Proceedings of International Conference on Noise and Vibration Engineering ISMA2012: International Conference on Uncertainty in Structural Dynamics, pp. 4381-4392, (2012)

[27]

Perisic N., Kirkegaard P.H., Low-cost tower root fatigue load estimation for structural health monitoring of grouted connections in offshore wind turbines, Damage Assesment of Strucure X: 10Th International Conference on Damage Assessment of Structures (DAMAS 2013), (2013)

[28]

Simon D., Optimal State Estimation: Kalman, H Infinity, and Nonlinear Approaches, by John Wiley & Sons Interscience, (2006)

[29]

Perisic N., System Identification of Wind Turbines for Structural Health Monitoring, (2013)

← 1 2 3 →