Study of the system efficiency of the traveling wave and hollow type ultrasonic motor based on Fourier transform

被引：0

作者：

Niu, Zijie ^{[1
]}

Sun, Zhijun ^{[1
]}

Wu, Jintao ^{[2
]}

Zhang, Jun ^{[1
]}

Zhang, Jiyang ^{[2
]}

Liang, Dazhi ^{[1
]}

机构：

[1] State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing

[2] Beijing Institute of Control Engineering, Beijing

来源：

Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis | 2015年 / 35卷 / 06期

关键词：

Fourier transform; Matching circuit; Resonant frequency; System efficiency; Ultrasonic motor;

D O I：

10.16450/j.cnki.issn.1004-6801.2015.06.002

中图分类号：

学科分类号：

摘要：

The traveling wave type ultrasonic motor has a high-pressure and high-frequency drive signal. The power and efficiency are difficult to detect at all levels of the system, which affects subsequent study of the performance of the traveling wave and hollow type ultrasonic motor. First, the ultrasonic motor drive signal is processed using the Fourier transform method. Then, the calculation method of all efficiency levels of the motor and drive system is established, and the power and efficiency are detected. Further, the effects of the driving frequency, driving voltage and resonance matching points on the system's efficiency are studied. Experiments show that the closer the resonance frequency of the driving frequency and the larger the drive voltage, the higher the overall efficiency of the system. Experiments ensured that the resonance point of the driver circuit was much higher than the mechanical resonant frequency, so that the drive signal frequency lay between the circuit resonance frequency and the mechanical resonant frequency. In this case, the efficiency of the system was highest. © 2015, Nanjing University of Aeronautics an Astronautics. All right reserved.

引用

页码：1012 / 1018

页数：6

共 8 条

[1]

Zhou L., Sun Z., Zhang Q., Et al., A precision alignment control method of linear ultrasonic motors using the normal distribution theory, Proceedings of the CSEE, 32, 27, pp. 60-65, (2012)

[2]

Zhao C., Recent propress in ultrasonic motor techniques, Journal of Vibration, Measurement & Diagnosis, 24, 1, pp. 1-5, (2004)

[3]

Zu J., Zhao C., Drive modes of stator of traveling wave ultrasonic motors and its vibration responses, Piezoelect Rics & Acoustooptics, 28, 1, pp. 93-95, (2006)

[4]

Shi J., Xiao J., The research of the ultrasonic motor series inductance matching circuit, Motor Control and Protection, 27, 12, pp. 31-34, (2008)

[5]

Niu Z., Sun Z., Chen C., Et al., Optimization of the rotor structure of a hollow traveling wave ultrasonic motor based on response surface methodology and self-adaptive genetic algorithm, Proceedings of the CSEE, 19, 35, pp. 62-64, (2014)

[6]

Nesbitt W.I., Andrew J., Modeling of a piezoelectric rotary ultrasonic motor, IEEE Transactions Ultrasonics Ferroelectrics & Frequency Control, 42, 2, pp. 210-224, (1995)

[7]

Jorg W., Contact mechanics of piezoelecctric ultrasonic motors, Smart Materials and Structures, 7, pp. 369-381, (1998)

[8]

Zeng J., Chen C., Zhao C., An effective technique for modifying modal frequencies of stator, The 2nd International Workshop on Piezoelectric Materials and Applications in Actuators, pp. 456-466, (2005)

← 1 →