Mechanical properties of jujube pit/linear low density polyethylene composites

被引：0
作者：
Lu W. [1 ,2 ]
Cai H. [1 ,2 ]
Yu W. [1 ,2 ]
Xu H. [1 ,2 ]
Han X. [1 ,2 ]
机构：
[1] School of Agricultural Engineering and Food Science, Shandong University of Technology, Zibo
[2] Shandong Research Center of Engineering and Technology for Clean Energy, Zibo
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2021年 / 38卷 / 06期
关键词：
Composites; Jujube pit; Low density polyethylene; Mechanical properties; Waste utilization;
D O I：
10.13801/j.cnki.fhclxb.20200909.004
中图分类号：
学科分类号：
摘要：
In order to make full use of the waste generated during the deep processing of red jujube, jujube pit (JP) and linear low density polyethylene (LLDPE) composites were prepared by injection molding method with JP and LLDPE as the main components. The static mechanical properties (tensile, flexural and impact) and dynamic mechanical properties (dynamic viscoelastic, creep behavior and stress relaxation behavior) were fully tested and analyzed. The static mechanical properties analysis show that the tensile and impact strength of JP/LLDPE composites are decreased as the JP contents increase, while the flexural strength of the composites is obviously improved. When the addition contents of JP reach 20wt%, the JP/LLDPE composite exhibit optimal flexural strength, which is 63.57% higher than that of pure LLDPE. Dynamic mechanical analysis confirms that the increase of JP contents is beneficial to improve the rigidity, creep resistance and stress relaxation of JP/LLDPE composites, but the increase of temperature adversely affects the creep resistance and stress relaxation resistance of JP/LLDPE composites. Copyright ©2021 Acta Materiae Compositae Sinica. All rights reserved.
引用
收藏
页码：1775 / 1783
页数：8
相关论文
共 27 条
[1]  
KANG N B, SHANG M Y, HE J G, Et al., Design of chained pneumatic punching automatic dried jujube pit removing machine, Transactions of the Chinese Society of Agricultural Engineering, 34, 22, pp. 19-26, (2018)
[2]  
MA Z F, LIU K, YANG J L, Et al., Progress on the technology of the red jujube kernel removing machine, Journal of Chinese Agricultural Mechanization, 40, 3, pp. 108-116, (2019)
[3]  
ZHOU J B, ZHANG S J, SUN H X, Et al., Research status and development trend of jujube kernel removing machine in China, Journal of Shanxi Agricultural Sciences, 42, 2, pp. 199-202, (2014)
[4]  
PANDHARIPADE S L, MOHARKAR Y, THAKUR R., Synthesis of adsorbents from waste materials such as ziziphus jujube seed & mango kernel, International Journal of Engineering Research and Applications, pp. 1337-1341, (2012)
[5]  
WANG Q W, YI X, SHEN J., Tailoring wood-plastic composites for furniture production: Possibilities and opportunities, China Forestry Science and Technology, 1, 3, pp. 1-8, (2016)
[6]  
SHEN T W, SUN Y N, LIU Y N, Et al., Study on preparation and adhesion property of veneer overlaid wood flour/high density polyethylene composites, China Forestry Science and Technology, 5, 4, pp. 101-107, (2020)
[7]  
ZHANG Q F, YANG K Y, CAI H Z, Et al., Comparison of properties between rice husk/high density polyethylene and rice husk biochar/high density polyethylene composites, Acta Materiae Compositae Sinica, 35, 11, pp. 3044-3050, (2018)
[8]  
MU B, WANG H, HAO X, Et al., Morphology, mechanical properties and dimensional stability of biomass particles/high density polyethylene composites: Effect of species and composition, Polymers, 10, 3, (2018)
[9]  
ZHU B H, HE C X, SHI F, Et al., Performance comparison of three kinds of husk's fibers/polyvinyl chloride composites, Acta Materiae Compositae Sinica, 34, 2, pp. 291-297, (2017)
[10]  
YANG L, WANG X F, ZHOU L H, Et al., Effects of hybrid process on mechanical properties of coir-hemp/polypropylene composites, Acta Materiae Compositae Sinica, 36, 9, pp. 2093-2100, (2019)
123