Research and application of two-stage and two-speed reaming technology in coal mine

被引：0
|
作者：
Zhao J. [1 ]
Li Q. [1 ]
Liu J. [1 ]
Yang D. [1 ]
机构：
[1] Xian Research Institute Co., China Coal Technology And Engineering Group Ltd., xian
来源：
Meitan Kexue Jishu/Coal Science and Technology (Peking) | 2021年 / 49卷 / 07期
关键词：
Reaming bit; Reaming classification; Roof high level directional drilling; Screw motor; Two-stage and two-speed reaming;
D O I：
10.13199/j.cnki.cst.2021.07.018
中图分类号：
学科分类号：
摘要：
Aiming at the problems of low comprehensive efficiency and poor safety of drilling tools, a two-stage and two-speed reaming method is developed. A two-stage and two-speed reaming drilling tool is developed, including a straight screw motor, a first-stage bit and a second-stage bit. Based on the theory of specific work of equal broken rock, the study of reaming classification is carried out. The cutting boundary diameter between the first and second drill bits is 157 mm, and the outer diameter of the first drill bit is 165~ 172 mm. The design and research are carried out from the aspects of shell, motor power assembly, cardan shaft assembly, transmission shaft assembly and connection module, and the 0105 mm two-stage and two-speed screw motor is developed. By means of parametric design, various specifications of first and second stage bits are developed. The field test results show that the two-stage and two-speed reaming technology can increase the diameter of high-level directional drilling from 120 mm to 200 mm at one time, improve the comprehensive drilling efficiency , and provide a new method for the quick hole formation of directional long drilling with high-efficiency gas drainage under pressure relief. © 2021 China Coal Society. All Rights Reserved.
引用
收藏
页码：133 / 138
页数：5
相关论文
共 17 条
  • [1] LI Hong, MA Jinkui, Analysis on gas drainage effect of large diam? eter roof directional long borehole instead of high drainage rock roadway[J], Coal Science and Technology, 48, 7, pp. 304-310, (2020)
  • [2] Chao XU, LIU Fei, FANG Jun, Effect analysis of gas drainage with high level directional long drilling [ J], Coal Engineering, 49, 6, pp. 78-81, (2017)
  • [3] CHEN Dongdong, SUN Siqing, ZHANG Jian, Et al., Technical sys? tem and engineering practice of coal seam permeability improvement through underground directional long borehole hy? draulic fracturing [ J], Coal Science and Technology, 48, 10, pp. 84-89, (2020)
  • [4] LI Quanxin, SHI Zhijun, SHI Haiqi, The application of direction? aldrilling technology in coal mine[J], Coal Geology & Exploration, 42, 2, pp. 85-92, (2014)
  • [5] WANG Haizhu, Roof kilometer directional drilling application of the No.2 shaft in Sihe Coal Mine[J], Coal, 25, 3, pp. 20-21, (2016)
  • [6] ZHAO Jianguo, Construction technology and development trend of high directional drilling in coal seam roof[ J], Coal Science and Technology, 45, 6, pp. 137-141, (2017)
  • [7] FANG Jun, SHI Zhijun, LI Quanxin, Et al., Drilling technology and equipment on directional high level and long borehole with largedi? ameter in roof [ J ], Mining Safety & Environmental Protection, 35, 7, pp. 92-97, (2015)
  • [8] ZHAO Jianguo, LIU Jianlin, DONG Changle, Et al., New reaming technology for high position and large diameter directional drilling in roof[J], Coal Science and Technology, 46, 4, pp. 40-45, (2018)
  • [9] DONG Mengmeng, Development and application of ø73 mm high toughness and high strength drilling pipe[ J], Coal Geology & Exploration, 45, 2, pp. 152-156, (2017)
  • [10] SU Zhenguo, TANG Zhijun, The design and field testing of two- stage and two-speed drilling tools[ J], Petroleum Drilling Techniques, 47, 1, pp. 59-64, (2019)
12