Preparation and thermoelectric properties of polymer-derived dense SiC nanocomposites

被引：0

作者：

Han, Xiaoyi ^{[1
,2
]}

Xing, Xin ^{[1
]}

Wang, Jun ^{[1
]}

Cheng, Haifeng ^{[1
]}

机构：

[1] National Key Laboratory of New Ceramic Fibres and Composites, National University of Defense Technology, Changsha

[2] Engineering Design Institution of Nanjing Command, Nanjing

来源：

Guofang Keji Daxue Xuebao/Journal of National University of Defense Technology | 2014年 / 36卷 / 05期

关键词：

Nanocomposites; Polymer-derived method; Silicon carbide; Thermoelectric properties;

D O I：

10.11887/j.cn.201405025

中图分类号：

学科分类号：

摘要：

Taking polycarbosilane and antimony-modified polysilane for precursors and drawing lessons from the transformation process of high temperature graphitization of spare free carbon in SiC materials, the polymer-derived SiC nanocomposites were prepared by employing hot-press sintering, precursor infiltrating-cracking methods and annealing. The phases and microstructures were characterized and analyzed by using SEM, TEM, XRD and Raman test methods. The thermoelectric parameters of samples, such as thermal conductivity, electrical conductivity and Seebeck coefficient, were studied. Results show that the dense SiC nanocomposites acquired are n-type thermoelectric materials. The thermal conductivity is suppressed at the range of 4~8W/(m·K) due to the function of nano-graphite. At the annealing temperature of 1600℃, the thermal conductivity reduces while both the electrical conductivity and the Seebeck coefficient increase, and ZT value of SiC nanocomposites derived from precursor reaches to 0.0028(650℃), which is higher than that of SiC/C composites or nanocomposites ever reported. ©, 2014, National University of Defense Technology. All right reserved.

引用

页码：149 / 154

页数：5

共 23 条

[1]

Qiu P.F., Yang J., Liu R.H., Et al., High-temperature electrical and thermal transport properties of fully filled skutterudites RFe4Sb12 (R=Ca, Sr, Ba, La, Ce, Pr, Nd, Eu, and Yb), Journal of Applied Physics, 109, 6, (2011)

[2]

Han X., Wang J., Cheng H., Et al., Research progress in thermoelectric oxides materials, Proceedings of the 7th National Conference on Chinese Functional Materials and Applications, 1-3, pp. 1-7, (2010)

[3]

Jones R.H., Henager C.H., Fusion reactor application issues for low activation SiC/SiC composites, Journal of Nuclear Materials, 219, pp. 55-62, (1995)

[4]

Zhao D., Zhang C., Hu H., Et al., Preparation and characterization of three-dimensional carbon fiber reinforced SiC-ZrC composites, Journal of National University of Defense Technology, 33, 6, pp. 129-133, (2011)

[5]

Kim J.G., Choi Y.Y., Choi D.J., Et al., Study on the thermoelectric properties of CVD SiC deposited with inert gases, Journal of Electronic Materials, 40, 5, pp. 840-844, (2011)

[6]

Takeda S., Pai C.H., Seo W.S., Et al., Thermoelectric properties of porous-SiC fabricated from rice hull ash, Journal of the Ceramic Society of Japan, 101, pp. 814-818, (1993)

[7]

Hicks L.D., Harman T.C., Sun X., Et al., Experimental study of the effect of quantum-well structures on the thermoelectric figure of merit, Physical Review B, 53, 16, (1996)

[8]

Lan Y.C., Minnich A.J., Chen G., Et al., Enhancement of thermoelectric figure-of-merit by a bulk nanostructuring approach, Advanced Functional Materials, 20, 3, pp. 357-376, (2010)

[9]

Gruen D.M., Bruno P., Arenal R., Et al., Thermoelectric power factors of nanocarbon ensembles as a function of temperature, Journal of Applied Physics, 105, 7, (2009)

[10]

Fujisawa M., Hata T., Bronsveld P., Et al., Thermoelectric properties of SiC/C composites from wood charcoal by pulse current sintering, Journal of the European Ceramic Society, 25, 12, pp. 2735-2738, (2005)

← 1 2 3 →