Tensile fracture of as-cast and hot rolled Mg-Zn-Y alloy with long-period stacking phase

被引：11

作者：

Wang B.-S. ^{[1
,2
]}

Xiong S.-M. ^{[1
]}

Liu Y.-B. ^{[3
]}

机构：

[1] State Key Laboratory of Automotive Safety and Energy, Department of Mechanical Engineering, Tsinghua University

[2] Department of Materials Science and Engineering, Changchun University of Technology, Ministry of Education

[3] Department of Materials Science and Engineering, Jilin University, Ministry of Education

来源：

Transactions of Nonferrous Metals Society of China (English Edition) | 2010年 / 20卷 / SUPPL. 2期

关键词：

fracture; long-period stacking phase; magnesium-yttrium-zinc alloy; mechanical properties; rolling;

D O I：

10.1016/S1003-6326(10)60524-9

中图分类号：

学科分类号：

摘要：

An experimental Mg97Zn1Y2 (molar fraction, %) alloy was produced by rolling the as-cast alloy. The microstructure of the alloy is composed of the α-Mg (also marked as 2H-Mg with reference to long-period stacking structure according to hexagonal close packed structure) and long-period stacking (LPS) phase. Tensile tests of Mg97Zn 1Y2 alloy in comparison with pure Mg were conducted. The fracture morphologies of the tensile specimens were characterized and the microstructures near fracture surface were observed. The results show that the rolled Mg97Zn1Y2 alloy shows a mixed fracture mode including dimples indicating a ductile fracture pattern and a small fraction of cleavage planes indicating a brittle fracture pattern, which is different from the single brittle fracture of the as-cast alloy. In addition, the plastic deformation is mainly from dislocations induced strain with small strengthening effect during plastic deformation in the as-cast Mg 97Zn1Y2 alloy, and the strain hardening rate is similar to that of the as-cast pure magnesium. The deformation mechanism of Mg97Zn1Y2 alloy is different from that of the pure magnesium according to a metallographical observation that whether twins are found or not. The strengthening effect hardly exists in the rolled Mg 97Zn1Y2 alloy under the same dislocations induced strain, which is different from that of the as-cast alloy with moderate strengthening effect. © 2010 The Nonferrous Metals Society of China.

引用

页码：s488 / s492

页数：4

共 18 条

[1]

Mordike B.L., Ebert T., Magnesium: Properties-applications-potential [J], Materials Science Engineering A, 302, 1, pp. 37-45, (2001)

[2]

Hort N., Huang Y.D., Kainer K.U., Intermetallics in magnesium alloys [J], Advanced Engineering Materials, 8, 4, pp. 235-240, (2006)

[3]

Padezhnova E.M., Melnik E.V., Miliyevskiy R.A., Dobatkina T.V., Kinzhibalo V.V., Investigation of the Mg-Zn-Y system [J], Russian Metallurgy (Metally) (Engl Transl), 4, 9, pp. 185-188, (1982)

[4]

Luo Z.P., Zhang S.Q., Tang Y.L., Zhao D.S., Comments on the so-called Z-phase in magnesium alloys containing zinc and rare-earth elements [J], Journal of Alloys and Compounds, 209, 1-2, pp. 275-278, (1994)

[5]

Luo Z.P., Zhang S.Q., High-resolution electron microscopy on the X-Mg12ZnY phase in a high-strength Mg-Zn-Zr-Y magnesium alloy [J], Journal of Materials Science Letters, 19, 9, pp. 813-815, (2000)

[6]

Kawamura Y., Hayashi K., Inoue A., Masumoto T., Rapidly solidified powder metallurgy Mg97Zn1Y 2 alloys with excellent tensile yield strength above 600 MPa [J], Materials Transaction, 42, 7, pp. 1172-1176, (2001)

[7]

Inoue A., Kawamura Y., Matsushita M., Hayashi K., Koike J., Novel hexagonal structure and ultrahigh strength of magnesium solid solution in the Mg-Zn-Y system [J], Journal of Materials Research, 16, 7, pp. 1894-1900, (2001)

[8]

Inoue A., Matsushita M., Kawamura Y., Amiya K., Hayashi K., Koike J., Novel hexagonal structure of ultra-high strength magnesium-based alloys [J], Materials Transaction, 43, 3, pp. 580-584, (2002)

[9]

Amiya K., Ohsuna T., Inoue A., Long-period hexagonal structures in melt-spun Mg97Ln 2Zn1 (Ln=Lanthanide metal) alloys [J], Materials Transaction, 44, 10, pp. 2151-2156, (2003)

[10]

Nishida M., Kawamura Y., Yamamuro T., Formation process of unique microstructure in rapidly solidified Mg 97Zn1Y2 alloy [J], Materials Science Engineering A, 375-377, pp. 1217-1223, (2004)

← 1 2 →