Synthesis of Ti3SiC2 from powder blend of Ti, Si and TiC

被引：0
|
作者：
Hashimoto, Hitoshi [1 ]
Sun, Zheng Ming [1 ]
Inoue, Yosuke [2 ]
Tada, Shuji [1 ]
机构：
[1] Material Research Institute for Sustainable Development, National Institute of Advanced Industrial Science and Technology, Shimoshidami, Moriyama-ku, Nagoya, 463-8560, Japan
[2] Yagusa-cho, Toyota, 470-0392, Japan
来源：
Journal of Alloys and Compounds | 2006年 / 426卷 / 1-2期
关键词：
Titanium silicon carbide Ti3SiC2 was synthesized from a powder blend of Ti; Si and TiC at a molar ratio of Ti:Si:TiC = 2:2:3. The powder blend was pressed and shaped into a cylinder and then sintered at various temperatures in vacuum. X-ray diffraction analysis was conducted on the cylinders sintered at various temperatures. Results of the XRD analysis revealed that Ti5Si3; the most thermodynamically stable phase in Ti-Si system; was preferentially formed by the reaction between Ti and Si powders followed by the formation of TiSi2 from remaining Ti and Si powders in a relatively low temperature range. These silicides reacted with TiC to form Ti3SiC2 at higher temperatures. The final phases in the cylinders sintered at temperatures over 1729 K were Ti3SiC2 and Ti5Si3; which well agrees with those estimated by a Ti-Si-C phase diagram. On the other hand; final phases in disks sintered under pressures of 14 MPa or more by using a carbon mold were found to be Ti3SiC2 and TiC; which suggests the equilibrium changes with the pressure. © 2006 Elsevier B.V. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：263 / 267
相关论文
共 50 条
  • [41] Formation of Ti3SiC2 from Ti-Si-TiC powders by pulse discharge sintering (PDS) technique
    Yang, SL
    Sun, ZM
    Hashimoto, H
    MATERIALS RESEARCH INNOVATIONS, 2003, 7 (04) : 225 - 230
  • [42] Preparation and characterization of Ti3SiC2 powder
    Li, H
    Peng, LM
    Gong, M
    Zhao, JH
    He, LH
    Guo, CY
    CERAMICS INTERNATIONAL, 2004, 30 (08) : 2289 - 2294
  • [43] Fabrication of monolithic Ti3SiC2 ceramic through reactive sintering of Ti/Si/2TiC
    Li, JT
    Miyamoto, Y
    JOURNAL OF MATERIALS SYNTHESIS AND PROCESSING, 1999, 7 (02) : 91 - 96
  • [44] Microstructure of Ti5Si3–TiC–Ti3SiC2 and Ti5Si3–TiC nanocomposites in situ synthesized by spark plasma sintering
    Lianjun Wang
    Wan Jiang
    Lidong Chen
    Guangzhao Bau
    Journal of Materials Research, 2004, 19 : 3004 - 3008
  • [45] Ti3SiC2/TiC composites prepared by PDS
    S. Konoplyuk
    T. Abe
    T. Uchimoto
    T. Takagi
    Journal of Materials Science, 2005, 40 : 3409 - 3413
  • [46] Crystallographic relations between Ti3SiC2 and TiC
    Zhou, YC
    Sun, ZM
    MATERIALS RESEARCH INNOVATIONS, 2000, 3 (05) : 286 - 291
  • [47] Ti3SiC2/TiC composites prepared by PDS
    Konoplyuk, S
    Abe, T
    Uchimoto, T
    Takagi, T
    JOURNAL OF MATERIALS SCIENCE, 2005, 40 (13) : 3409 - 3413
  • [48] Synthesis, microstructure and mechanical properties of Ti3SiC2-TiC composites pulse discharge sintered from Ti/Si/TiC powder mixture
    Tian, WuBian
    Sun, ZhengMing
    Hashimoto, Hitoshi
    Du, YuLei
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 526 (1-2): : 16 - 21
  • [49] Liquid reaction during synthesis of Ti3SiC2 through pulse discharge sintering Ti/Si/TiC mixed powders
    Zou, Yong
    Sun, Zheng Ming
    Tada, Shuji
    Hashimoto, Hitoshi
    MATERIALS TRANSACTIONS, 2006, 47 (12) : 2987 - 2990
  • [50] Rapid synthesis of ternary carbide Ti3SiC2 through pulse-discharge sintering technique from Ti/Si/TiC powders
    Z. F. Zhang
    Z. M. Sun
    H. Hashimoto
    Metallurgical and Materials Transactions A, 2002, 33 : 3321 - 3328
12345