Synthesis of Ti3SiC2 from powder blend of Ti, Si and TiC

被引:0
|
作者
Hashimoto, Hitoshi [1 ]
Sun, Zheng Ming [1 ]
Inoue, Yosuke [2 ]
Tada, Shuji [1 ]
机构
[1] Material Research Institute for Sustainable Development, National Institute of Advanced Industrial Science and Technology, Shimoshidami, Moriyama-ku, Nagoya, 463-8560, Japan
[2] Yagusa-cho, Toyota, 470-0392, Japan
来源
Journal of Alloys and Compounds | 2006年 / 426卷 / 1-2期
关键词
Titanium silicon carbide Ti3SiC2 was synthesized from a powder blend of Ti; Si and TiC at a molar ratio of Ti:Si:TiC = 2:2:3. The powder blend was pressed and shaped into a cylinder and then sintered at various temperatures in vacuum. X-ray diffraction analysis was conducted on the cylinders sintered at various temperatures. Results of the XRD analysis revealed that Ti5Si3; the most thermodynamically stable phase in Ti-Si system; was preferentially formed by the reaction between Ti and Si powders followed by the formation of TiSi2 from remaining Ti and Si powders in a relatively low temperature range. These silicides reacted with TiC to form Ti3SiC2 at higher temperatures. The final phases in the cylinders sintered at temperatures over 1729 K were Ti3SiC2 and Ti5Si3; which well agrees with those estimated by a Ti-Si-C phase diagram. On the other hand; final phases in disks sintered under pressures of 14 MPa or more by using a carbon mold were found to be Ti3SiC2 and TiC; which suggests the equilibrium changes with the pressure. © 2006 Elsevier B.V. All rights reserved;
D O I
暂无
中图分类号
学科分类号
摘要
Journal article (JA)
引用
收藏
页码:263 / 267
相关论文
共 50 条
  • [31] Fabrication of SiCf/Ti3SiC2 by the electrophoresis of highly dispersed Ti3SiC2 powder
    Kwon, Heejin
    Zhou, Xiaobing
    Yoon, Dang-Hyok
    CERAMICS INTERNATIONAL, 2020, 46 (11) : 18168 - 18174
  • [32] Synthesis of Ti3SiC2 in air using mechanically activated 3Ti/Si/2C powder
    Liang, B. Y.
    Wang, M. Z.
    Sun, J. F.
    Li, X. P.
    Zhao, Y. C.
    Han, X.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 474 (1-2) : L18 - L21
  • [33] Powder synthesis and pressureless sintering of Ti3SiC2 ceramics
    Li, JF
    Toshiro, M
    Yoshihiro, T
    Ryuzo, W
    RARE METAL MATERIALS AND ENGINEERING, 2002, 31 : 125 - 128
  • [34] Synthesis of nano-laminated Ti3SiC2 from Ti-Ti5Si3 and CNTs
    Huang, Tsung-Yen
    Chen, Chien-Chong
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 466 (1-2): : 148 - 155
  • [35] Effect of liquid reaction on the synthesis of Ti3SiC2 powder
    Zou, Yong
    Sun, ZhengMing
    Tada, Shuji
    Hashimoto, Hitoshi
    CERAMICS INTERNATIONAL, 2008, 34 (01) : 119 - 123
  • [36] Synthesis of single-phase Ti3SiC2 powder
    Yang, SL
    Sun, ZM
    Hashimoto, H
    Abe, T
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2003, 23 (16) : 3147 - 3152
  • [37] Laser initiated Ti3SiC2 powder and coating synthesis
    Rutkowski, Pawel
    Huebner, Jan
    Kata, Dariusz
    Lis, Jerzy
    Grabos, Adrian
    Chlubny, Leszek
    CERAMICS INTERNATIONAL, 2018, 44 (09) : 10883 - 10890
  • [38] Evolution of binary phase TiC/Ti3SiC2 composites from TiC/Ti/Si by hot-pressed reactive sintering
    Lo, Wen-Tse
    Nayak, Pramoda K.
    Lu, Horng-Hwa
    Lii, Ding-Fwu
    Huang, Jow-Lay
    MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2010, 172 (01): : 18 - 23
  • [39] Rapid synthesis of TiC/Ti3SiC2 composites by laser melting
    Chen, Deqiang
    Tian, Xiangjun
    Wang, Huaming
    Huang, Zheng
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2014, 47 : 102 - 107
  • [40] Si-induced twinning of TiC and formation of Ti3SiC2 platelets
    Yu, R
    Zhan, Q
    He, LL
    Zhou, YC
    Ye, HQ
    ACTA MATERIALIA, 2002, 50 (16) : 4127 - 4135