Reforming of tar in producer gas from woody biomass (application of the inverse diffusion flame in the partial combustion)

被引：0

作者：

Nakatsuka N. ^{[1
]}

Hayashi J. ^{[1
]}

Imoto Y. ^{[1
]}

Taniguchi M. ^{[1
]}

Sasauchi K. ^{[1
]}

Matsuda M. ^{[1
]}

Akamatsu F. ^{[1
]}

机构：

[1] Department of Mechanical Engineering, Osaka University, Suita-shi, Osaka, 565-0871

来源：

Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B | 2010年 / 76卷 / 770期

关键词：

Biomass; Exergy; Gas reformer; Inverse diffusion flame; Soot; Tar;

D O I：

10.1299/kikaib.76.770_1637

中图分类号：

学科分类号：

摘要：

Experimental study for clarifying the effect of combustion mechanism on reforming of producer gas was carried out. The inverse diffusion flame was formed in the actual gas reformer by partial combustion of producer gas. Direct observation and laser diagnostics were applied to the inverse diffusion flame formed in the modeled gas reformer. Experimental parameters are steam concentration in supplied model producer gas (Xsteam) corresponding to moisture content of wood, and the flame configuration (flame at the nozzle and lifted flame). The main results are as follows. In the condition of 20% concentration of oxygen, flames at the nozzle and lifted flames were formed in the same supply condition. One might identify a type of hysteresis in flame formation that determines its configuration. When the flames at the nozzle were formed, the exergy yield was increased with the increase of Xsteam because soot formation was suppressed and steam reforming of model tar can be promoted. In contrast, when the lifted flames were formed, the exergy yield was decreased with the increase of Xsteam because of formation of the particulate matter such as the soluble organic fraction and the young soot.

引用

页码：1637 / 1645

页数：8

共 27 条

[1] Sasauchi K., Tanaka H., Taniguchi M., Generation system in woody biomass by indirect heating kiln type gasifier, The Japan Institute of Energy, 13, pp. 210-211, (2004)
[2] Henriksen U., Ahrenfeldt J., Jensen T.K., Gobel B., Bentzen J.D., Hindsgaul C., Sarensen L.H., The design, construction and operation of a 75 kW two stage gasifier, Energy, 31, pp. 1542-1553, (2006)
[3] Yamasaki Y., Nishizawa Y., Nagata Y., Yamazaki D., Kaneko S., Electric power generation with a modified small size auto-mobile gasoline engine using the biomass gas fuel, The Japan Institute of Energy, 17, pp. 124-125, (2008)
[4] Milne T.A., Evans R.J., Biomass Gasifier Tars: Their Nature, Formation, and Conversion, (1998)
[5] Hasler P., Nussbaumer T.H., Gas Cleaning for IC Engine applications from fixed bed gasification, Biomass and Bioenergy, 16, pp. 385-395, (1999)
[6] Waldner M.H., Vogel F., Renewable production of methane from woody biomass by catalytic hydrothermal gasification, Industrial & Engineering Chemistry Research, 13-44, (2005)
[7] Strehlow R.A., Combustion Fundamentals, (1984)
[8] Houben M.P., Lange H.C., Steenhoven A.A., Tar reduction through partial combustion of fuel gas, Fuel, 84, pp. 817-824, (2005)
[9] Ohteru Y., Matsuo A., Mizomoto M., Characteristic of laminar inverse diffusion flame, Journal of the Japan Society of Mechanical Engineers, Series B, 66-641, pp. 263-270, (2000)
[10] Minkofski M.A., Williams T.C., Shaddix C.R., Fernandez-Pello A.C., Blevins L.G., Flame height measurement of laminar inverse diffusion flame, Combustion and Flame, 146, pp. 63-72, (2006)

← 1 2 3 →